Toshiba Satellite A10 Maintenance Manual page 313

4 Replacement Procedures
4. Stick the outside tape and install the cover shield.
4-106
Downloaded from www.Manualslib.com
1) Stick the tape shield and adhesive tape to fix the top case.
NOTE: Be careful not to apply excessive force to the top case.
2) Install the cover shield (C).
NOTE: Be careful not to apply excessive force to the control PCB.
CAUTION: Wear anti-static gloves to prevent circuit damage to the source
PCB.
3) Install the cover shield (G).
NOTE: Be careful not to apply excessive force to the gate TCP.
4) Stick the adhesive tape to fix the B/L wire.
NOTE: Be careful not to apply excessive force to the B/L wire.
Adhesive tape
Adhesive tape
Figure 4-97 Replacing 15.0 Inch LG.Philips fluorescent lamp (XGA) (8)
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
manuals search engine
Cover shield (C)
Cover shield (G)
Tape shield
4.18 Fluorescent Lamp