4 Replacement Procedures
4.3
CAUTION: The power of the computer must be turned off when you remove the memory
Removing the memory module
To remove a memory module, confirm that the computer is in boot mode. Then perform the
following procedure (See Figure 4-4, 4-5).
1. Turn the computer upside down.
2. Remove the screw fixing the memory slot cover. (This screw is fixed to the memory
3. Remove the memory slot cover from the screw side.
4-12
Downloaded from
www.Manualslib.com
Memory Module
module. Removing a memory module with the power on risks damaging the
module or the computer itself.
Do not touch the memory module terminals. Any dirt on the terminals may cause
memory access problems.
Never press hard or bend the memory module.
slot cover and can not be removed.)
Figure 4-4 Removing Memory Slot Cover
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
manuals search engine
4.3 Memory Module
THIN BIND M2.5×4B