Toshiba Satellite A10 Maintenance Manual page 196

3.27 SETUP
10. Drives I/O
11. PCI Bus
12. PC Card
13. Peripheral
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
Downloaded from www.Manualslib.com
This option displays the address and interrupt level for the hard disk drive, CD/DVD-
ROM drive and PC card. It is for information only and cannot be changed.
Built-in HDD The setting for the built-in HDD is displayed.
CD-ROM The setting for the built-in CD-ROM is displayed.
PC Card This is displayed, when a PC card type HDD that can boot system is
inserted to PC card slot.
This option displays the interrupt level for the Card Bus in the computer. It is for
information only and cannot be changed.
PCI BUS = IRQ10, IRQ11
This option displays the PC Card Controller mode.
Auto-Selected
CardBus/16-bit If you are using Windows for Workgroups or Windows NT
PCIC Compatible
Use this option to select the peripheral's mode.
(a) Internal Pointing Device
This option enables or disables the touch pad
Enabled
Disabled
manuals search engine
Use this setting for all PC Card if you are using Windows
98/2000/XP which support Plug&Play. (Default)
4 or lower or if the card does not work properly with the
Auto-Selected setting, use this setting for Card Bus PC
card.
If you are using Windows for Workgroups or Windows NT
4 or lower or if the card does not work properly with the
Auto-Selected and CardBus/16 bit setting.
Enables the touch pad. (Default)
Disables the touch pad.
3 and Diagnostics
3-81