4.11 Touch Pad
4.11 Touch Pad
Removing the Touch Pad
The following describes the procedure for removing the touch pad (See Figure 4-27).
1. Disconnect the touch pad flexible cable from PJ3201 on the system board.
2. Remove the following screw securing the touch pad.
3. Remove the touch pad.
M2.5x4 THIN BIND
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
Downloaded from
www.Manualslib.com
•
M2.5x5
PJ3201
Figure 4-27 Removing Touch Pad
manuals search engine
THIN BIND screw
x1
Touch Pad Flexible Cable
4 Replacement Procedures
Touch Pad
4-39