4.18 Fluorescent Lamp
4. Turn the LCD module face down and remove the two screws fixing the board. Then
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
Downloaded from
www.Manualslib.com
open the bent portion of the TCP of the board and remove the backlight.
Screw
Figure 4-110 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (4)
Do not hold the edge.
Figure 4-111 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (5)
manuals search engine
Screw loosening torque: 1.2kg•cm
Raise the board and make this condition.
4 Replacement Procedures
Screw
Do not hold the edge.
4-115