4.15 Touch Pad Switch
4.15 Touch Pad Switch
Removing the Touch Pad Switch
The following describes the procedure for removing the touch pad switch (See Figure 4-33).
1. Remove the following screws fixing the touch pad switch.
2. Remove the touch pad switch.
Installing the Touch Pad Switch
The following describes the procedure for installing the touch pad switch (See Figure 4-33).
1. Set the touch pad switch with its holes attached to the guide pins.
2. Fix the touch pad switch with the following screws.
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
Downloaded from
www.Manualslib.com
• M2.5x4
Figure 4-33 Removing Touch Pad Switch
• M2.5x4
manuals search engine
PSP TIGHT screw
x2
M2.5x4 PSP TIGHT
Touch Pad Switch
PSP TIGHT screw
x2
4 Replacement Procedures
4-49