Real Timer Test - Toshiba Satellite A10 Maintenance Manual

3.12 Real Timer Test

3.12 Real Timer Test
To execute the Real Timer Test, select 9 from the DIAGNOSTIC TEST MENU, press Enter
and follow the directions on the screen. The real timer test contains subtests that test the
computer's real timer functions. Move the highlight bar to the subtest you want to execute
and press Enter.
Subtest 01
Subtest 02
Satellite A10/TECRA A10/Satellite Pro A10 Maintenance Manual (960-445)
Downloaded from www.Manualslib.com
Real time
A new date and time can be input during this subtest. To execute the real time
subtest follow these steps:
Step 1: Select subtest 01 and the following message will appear:
Current date
Current time
Enter new date:
PRESS [Enter] KEY TO EXIT TEST
Step 2: If the current date is not correct, input the correct date and press
Enter. The date is updated and the following prompt will appear. If
the current data is correct, press Enter.
Enter new time :
Step 3: If the current time is not correct, input the correct time in 24-hour
format and press Enter. The time is updated. To enter ":", press Shift
+ ;.
To exit this subtest, press Ctrl + Break.
Backup memory
This subtest checks the following backup memories:
Writes 1-bit of "on" data (01h through 80h) to address 0Eh through 7Fh
Writes 1-bit of "off" data (FEh through 7Fh) to address 0Eh through 7Fh
Writes the data pattern AAh and 55h to the address 0Eh to 7Fh
Then the subtest reads and compares this data with the original data.
manuals search engine
: XX-XX-XXXX
: XX:XX:XX
3 Tests and Diagnostics
3-31