Bat Con Holder - Toshiba Satellite A10 Maintenance Manual

4.12 BAT CON Holder

4.12 BAT CON Holder
Removing the BAT CON Holder
The following describes the procedure for removing the BAT CON holder (See Figure 4-28).
1. Remove the following screws fixing the BAT CON holder.
2. Remove the BAT CON holder from the system board.
Installing the BAT CON Holder
The following describes the procedure for installing the BAT CON holder (See Figure 4-28).
1. Install the CON holder on the system board.
2. Secure the BAT CON holder with the following screws.
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
Downloaded from www.Manualslib.com
• M2.5x8
THIN BIND screw
Figure 4-28 Removing BAT CON Holder
• M2.5x8
THIN BIND screw
manuals search engine
4 Replacement Procedures
x2
BAT CON Holder
THIN BIND M2.5x8
x2
4-41