Related Manuals for Toshiba PSA10C-00REH
Summary of Contents for Toshiba PSA10C-00REH
- Page 1 User’s Manual SatellitePro TE PRO A10 SATELLITE PRO A10 SATELLITE A20 Choose freedom. Choose freedom. Choose freedom. computers.toshiba-europe.com...
- Page 2 User's Manual Copyright © 2003 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.
- Page 3 User's Manual Modem warning notice Conformity Statement The equipment has been approved to [Commission Decision “CTR21”] for pan-European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point.
- Page 4 User's Manual TEAC CD-ROM drive CD-224E, CD-RW/DVD-ROM drive DW-224E safety instruction The CD/DVD drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
- Page 5 User's Manual Toshiba DVD-ROM drive SD-C2612, CD-RW/DVD-ROM drive SD-R2412, DVD-R/-RW drive SD-R6012 safety instruction The CD/DVD drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
- Page 6 User's Manual HITACHI DVD-ROM drive GDR-8082 safety instruction The DVD-ROM drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
- Page 7 User's Manual Panasonic CD-RW/DVD-ROM drive UJDA-740/750 safety instruction The CD-RW/DVD-ROM drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
-
Page 8: General Precautions
User's Manual General Precautions TOSHIBA computers are designed to optimise safety, minimise strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual. -
Page 9: Lcd Display
Read additional restrictions under Environmental Requirements defined in the Appendix A. Contact TOSHIBA Technical Service and Support for more information. PC Card overheating Some PC cards can become hot with prolonged use. Overheating of a PC Card can result in errors or instability in the PC Card operation. -
Page 10: Working Environment
This product was designed to fulfil the EMC (electromagnetic compatibility) requirements to be observed for so-called "Residential, commercial and light industry environments". TOSHIBA do not approve the use of this product in working environments other than the above mentioned "Residential, commercial and light industry environments". - Page 11 About TOSHIBA Wireless Solution Wireless LAN Card Types The Wireless LAN Card is a wireless network card that complies with the IEEE 802.11 standard on wireless LANs (Revision B).
-
Page 12: Wireless Interoperability
User's Manual Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any Wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant ■ The IEEE 802.11 Standard on Wireless LANs (Revision B), as defined and approved by the Institute of Electrical and Electronics Engineers. -
Page 13: Limitation Of Liability
User's Manual Limitation of Liability For damage occurring due to an earthquake or thunder, fire beyond our responsibility, action by third party, other accident, intentional or accidental mistakes by a user, misuse, use under abnormal conditions, we do not take any responsibility. For incidental damage (loss of business profit, business interruption, etc.) occurring due to use or disability of the product, we do not take any responsibility. - Page 14 User's Manual WARNING Turn OFF the Wireless Communication switch of Wireless Products in a congested place, such as a crowded commuter train. Keep this product away from a cardiac pacemaker at least 22cm. Radio waves can potentially affect cardiac pacemaker operation, thereby causing respiratory troubles.
-
Page 15: Regulatory Information
User's Manual Regulatory Information The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards. - Page 16 User's Manual Belgium/ For outdoor usage only channel 10 (2457 MHz) België/Belgique and 11 (2462 MHz) is allowed. For private usage outside buildings across public grounds over less than 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
- Page 17 TOSHIBA is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this TOSHIBA Wireless LAN Mini PCI Card, or the substitution or attachment of connecting cables and equipment other than specified by TOSHIBA.
- Page 18 User's Manual Caution: Exposure to Radio Frequency Radiation. The Toshiba Wireless LAN Mini PCI Card will be installed with one of two types of antennas. Both antenna types, when installed are located at the upper edge of the LCD screen.
- Page 19 2. In case that RF interference occurs to Other Radio Stations from this equipment, please change promptly the frequency for use, place to use, or stop emitting Radio. 3. Please contact TOSHIBA Direct PC if you have a problem, such as interference from this equipment to Other Radio Stations.
- Page 20 User's Manual Device Authorisation This device obtains the Technical Regulation Conformity Certification and the Technical Conditions Compliance Approval, and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Radio Law and the Telecommunications Business Law of Japan.
-
Page 21: Table Of Contents
Table of Contents Satellite Pro A10 Series Table of Contents Preface ..................xxvii Manual contents................xxviii Conventions..................xxix Abbreviations..................xxix Icons ....................xxix Keys....................xxix Key operation ...................xxix Display....................xxix Messages ..................xxix Chapter 1 Introduction..............1-1 Equipment checklist ................1-1 Hardware ...................1-1 Software ....................1-2 Documentation ..................1-2 Features ....................1-3 Special features..................1-8 Utilities ....................1-10... - Page 22 Turning off the power ................3-7 Shut Down mode (Boot mode) ............3-7 Hibernation mode ................3-8 Standby mode .................3-10 Restarting the computer..............3-11 Restoring the preinstalled software ..........3-12 Restoring the complete system ............3-12 Restoring TOSHIBA utilities and drivers ..........3-12 Satellite Pro A10 Series xxii...
- Page 23 Table of Contents Chapter 4 Operating Basics .............4-1 Using the Touch pad ................4-1 Using the USB diskette drive ...............4-2 Connecting 3 ½" diskette drive ............4-2 Disconnecting 3 ½" diskette drive.............4-3 Using optical media drives ..............4-3 Loading discs ..................4-3 Removing discs .................4-7 Writing CDs on CD-RW/DVD-ROM drive..........4-8 Before writing or rewriting ..............4-8 When writing or rewriting..............4-9...
- Page 24 Table of Contents Chapter 5 The Keyboard ............5-1 Typewriter keys ..................5-1 F1…F12 function keys................5-2 Soft Keys: Alt Gr Key Combinations ............5-2 Soft keys: Fn key combinations ............5-2 Emulating keys on enhanced keyboard..........5-3 Hot keys ....................5-4 Fn Sticky key ..................5-5 Windows special keys ...............5-6 Keypad overlay ..................5-6 Turning on the overlays ..............5-6 Temporarily using normal keyboard (overlay on) .......5-7...
- Page 25 Table of Contents Chapter 7 HW Setup and Passwords........7-1 Accessing HW Setup................7-1 HW Setup window ................7-1 Password...................7-2 Supervisor password ................7-9 Chapter 8 Optional Devices .............8-1 PC cards....................8-2 Inserting a PC card ................8-2 Removing a PC card................8-3 Memory expansion................8-4 Installing memory module..............8-5 Removing memory module..............8-7 Battery pack...................8-8 Universal AC adaptor ................8-8...
- Page 26 Before you call.................9-17 Where to write .................9-17 Appendix A Specifications ............A-1 Appendix B AC Power Cord and Connectors ....... B-1 Appendix C The TOSHIBA International Warranty ....C-1 Appendix D Keyboard Layouts ..........D-1 Appendix E Display Controller and Modes......E-1 Appendix F If your computer is stolen ........
-
Page 27: Preface
Preface Satellite Pro A10 Series Preface Congratulations on your purchase of the Satellite Pro A10 Series computer. This powerful notebook computer provides excellent expansion capability, including multimedia devices, and it is designed to provide years of reliable, high-performance computing. This manual tells how to set up and begin using your Satellite Pro A10 Series computer. -
Page 28: Manual Contents
Preface Manual contents This manual offers important information about your computer, including solutions to the most common problems, and features and specifications. It is composed of the following chapters, appendices, a glossary and an index. Chapter 1, Introduction, is an overview of the computer’s features, capabilities, and options. -
Page 29: Conventions
Preface Conventions This manual uses the following formats to describe, identify, and highlight terms and operating procedures. Abbreviations On first appearance, and whenever necessary for clarity, abbreviations are enclosed in parentheses following their definition. For example: Read Only Memory (ROM). Acronyms are also defined in the Glossary. Icons Icons identify ports, dials, and other parts of your computer. -
Page 30: Chapter 1 Introduction
Some of the features described in this manual may not function properly if you use an operating system that was not preinstalled by TOSHIBA. Equipment checklist Carefully unpack your computer. Save the box and packing materials for future use. -
Page 31: Software
Wireless LAN driver ■ Sound Driver for Windows ■ DVD Video Player ■ LAN Driver ■ Pointing device Driver ■ TOSHIBA Power Saver ■ TOSHIBA Console ■ Drag’n Drop CD+DVD ■ Online manual ■ Product Recovery CD-ROM or DVD-ROM ■... -
Page 32: Features
Introduction Features The computer uses TOSHIBA’s advanced Large Scale Integration (LSI), Complementary Metal-Oxide Semiconductor (CMOS) technology extensively to provide compact size, minimum weight, low power usage, and high reliability. This computer incorporates the following features and benefits: Processor Built-in Some configurations are equipped with a Mobile ®... - Page 33 Introduction Power Battery pack The computer is powered by one rechargeable lithium-ion battery pack. RTC battery The computer has an internal battery to back up the internal Real Time Clock (RTC) and calendar. AC adaptor The AC adaptor provides power to the system and recharges the batteries when they are low.
-
Page 34: Pointing Device
Introduction CD-RW/DVD-ROM Some models are equipped with a full-size drive CD-RW/DVD-ROM drive module that lets you run CD/DVDs without using an adaptor. It reads DVD-ROMs at maximum 8 speed and CD-ROMs at maximum 24 speed. It writes CD-Rs at up to 24 speed and CD-RWs at up to 10 speed. - Page 35 Introduction Ports Parallel Some models are equipped with a parallel port for parallel printer or other parallel device (ECP compatible). Note that some models are not equipped with this port. External monitor 15-pin, analog VGA port supports VESA DDC2B compatible functions. Universal Serial Bus The computer has two Universal Serial Bus ports (USB 2.0)
- Page 36 Software Standard Windows XP Home Edition operating system and TOSHIBA Utilities and drivers preinstalled on the hard disk. Plug and Play When you connect an external device to the computer, Plug and Play capability enables the system to recognize the connection and make the necessary configurations automatically.
-
Page 37: Special Features
Introduction Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. Hot keys Key combinations let you quickly modify the system configuration directly from the keyboard without running a system configuration program. - Page 38 This feature lets you save battery power. You can specify the Power Save Mode in the Running on batteries item of the Power Save Modes window in TOSHIBA Power Saver. Panel power off/on This feature turns power to the computer off when the display panel is closed and turns it back on when the panel is opened.
-
Page 39: Utilities
Windows Start button and click Control Panel. In the Control Panel, select the TOSHIBA HW Setup icon. TOSHIBA Console is a graphical user interface TOSHIBA Console that provides access to help and services. The DVD Video Player is used to play DVD Video Player DVD-Video. -
Page 40: Options
DDR) can easily be installed in the computer. Battery pack An additional battery pack can be purchased from your TOSHIBA dealer. Use it as a spare or replacement. AC adaptor If you use your computer at more than one site... -
Page 41: Chapter 2 The Grand Tour
The Grand Tour Satellite Pro A10 Series Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Front with the display closed The figure below shows the computer’s front with its display panel in the closed position. -
Page 42: Left Side
The Grand Tour Set the switch to off in airplanes and hospitals. Check the wireless communication indicator. It will stop glowing when the wireless communication function is off. Wireless This indicator glows orange when Wireless LAN communication function is on (Wireless LAN model or Wireless Indicator LAN ready model only). -
Page 43: Right Side
The Grand Tour Right side The figure below shows the computer’s right side. OPTICAL MEDIA DRIVE MODEM JACK The right side of the computer See Chapter 4, Operating Basics, for information Optical Media Drive on using the drive and caring for CDs and DVDs. Some models are equipped with a full-size DVD-ROM drive DVD-ROM drive module that lets you run... -
Page 44: Back Side
The Grand Tour Back side The figure below shows the computer’s back panel. EXTERNAL MONITOR SECURITY LOCK LAN INDICATORS USB PORTS PORT DC IN 15V LAN JACK TV OUT PORT PARALLEL PORT * Some models are not equipped with a Parallel Port or a TV Out Port. The back side of the computer A security cable attaches to this slot. - Page 45 The Grand Tour Universal Serial Bus Two Universal Serial Bus ports are on the back (USB 2.0) ports side. The ports comply with the USB 2.0 standard, which enables data transfer speeds 40 times faster than the USB 1.1 standard. (The ports also support USB 1.1.) Keep foreign objects out of the USB connectors.
-
Page 46: Underside
The Grand Tour Underside The figure below shows the underside of the computer. Make sure the display is closed before turning over your computer. MEMORY MODULE BATTERY PACK LOCK COVER BATTERY RELEASE BATTERY PACK LATCH The underside of the computer Battery release latch Slide this latch to release the battery pack for removal. -
Page 47: Front With The Display Open
The Grand Tour Front with the display open The figure below shows the front of the computer with the display open. To open the display, slide the display latch on the front of the display to the right of the computer and lift up. Position the display at a comfortable viewing angle. -
Page 48: System Indicators
The Grand Tour Stereo speakers The speakers emit sound generated by your software as well as audio alarms, such as low battery condition, generated by the system. Power button Press the power button to turn the computer’s power on and off. Touch pad A Touch pad located slightly in the left from the centre of the palm rest is used to control the... -
Page 49: Keyboard Indicators
The Grand Tour Keyboard indicators The figures below show the positions of the keypad overlay indicators and the CapsLock indicator. When the F10 key indicator glows the keypad overlay lets you control the cursor. When the F11 key indicator glows the keypad overlay lets you enter numbers. -
Page 50: Usb Diskette Drive
The Grand Tour USB diskette drive A 3 ½" diskette drive accommodates 1.44-megabyte or 720-kilobyte diskettes. It connects to the USB port. DISK-IN-USE INDICATOR DISKETTE SLOT EJECT BUTTON USB diskette drive Disk-In-Use Indicator This indicator lights when the diskette is being accessed. -
Page 51: Optical Media Drive
The Grand Tour Optical media drive DVD-ROM drive Some models are equipped with a full-size, DVD-ROM drive module that lets you run either 12 cm (4.72") or 8 cm (3.15") CDs or 12cm(4.72") DVDs without using an adaptor. It runs DVD-ROMs at maximum 8 speed and CD-ROMs at maximum 24 speed. -
Page 52: Cd-Rw/Dvd-Rom Drive
The Grand Tour CD-RW/DVD-ROM drive Some models are equipped with a full-size, CD-RW/DVD-ROM drive module that lets you run CD/DVDs without using an adaptor. It reads DVD-ROMs at maximum 8 speed and CD-ROMs at maximum 24 speed. It writes CD-R at up to 24 speed and CD-RW at up to 10 speed. For reading, this drive supports the same formats as the DVD-ROM drive. -
Page 53: Dvd-R/-Rw Drive
The Grand Tour DVD-R/-RW drive Some models are equipped with a full- size DVD-R/RW drive module that lets you record data to rewritable CD/DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CDs/12 cm (4.72") DVDs without using an adaptor. -
Page 54: Universal Ac Adaptor
Use only the universal AC adaptor that came with the computer or an equivalent optional adaptor. Use of the wrong adaptor could damage your computer. TOSHIBA assumes no liability for any damage in such case. Satellite Pro A10 Series 2-14... -
Page 55: Chapter 3 Getting Started
Getting Started Satellite Pro A10 Series Chapter 3 Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: ■ Setting up your work space — for your health and safety Be sure also to read the Safety Instruction Manual. This guide, which is included with the computer, explains product liability. -
Page 56: General Conditions
Getting Started General conditions In general, if you are comfortable, so is your computer, but read the following to make sure your work site provides a proper environment. ■ Make sure there is adequate space around the computer for proper ventilation. -
Page 57: Seating And Posture
Getting Started Seating and posture The height of your chair in relation to the computer and keyboard as well as the support it gives your body are primary factors in reducing work strain. Refer to the following tips. Posture and positioning of the computer ■... -
Page 58: Lighting
Getting Started Lighting Proper lighting can improve legibility of the display and reduce eye strain. ■ Position the computer so that sunlight or bright indoor lighting does not reflect off the screen. Use tinted windows, shades or other screen to eliminate sun glare. ■... -
Page 59: Connecting The Ac Adaptor
Use only the AC adaptor that came with the computer or an equivalent optional adaptor. Use of the wrong adaptor could damage your computer. TOSHIBA assumes no liability for any damage in such case. 1. Connect the power cord to the AC adaptor. -
Page 60: Opening The Display
Getting Started Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. 1. Slide the display latch on the front of the computer to the right. 2. Lift the panel up and adjust it to the best viewing angle for you. Use reasonable care when opening and closing the display panel. -
Page 61: Starting Up For The First Time
Getting Started Starting up for the first time When you first turn on the power, the computer’s initial screen is the Microsoft Windows XP Startup Screen Logo. Follow the on-screen directions for each screen. During setup, you can click the Back button to return to the previous screen. -
Page 62: Hibernation Mode
For the computer to shut down in hibernation mode, the hibernation feature must be enabled in two places in TOSHIBA Power Saver: the Hibernate window and the Battery Alarm item of the Alarm window. -
Page 63: Automatic Hibernation
First, however, make the appropriate settings according to the steps below. 1. Open the Control Panel. 2. Open Performance and Maintenance and open TOSHIBA Power Saver. 3. Select the Hibernate window, select the Enable Hibernate support check box and click the Apply button. -
Page 64: Standby Mode
When the AC adaptor is used, the computer goes into Standby mode depending on the setting of the TOSHIBA Power Saver feature. To restore operation, press the power button or press any key. The latter action works only if Wake-up on Keyboard is enabled in HW setup. -
Page 65: Restarting The Computer
2. Close the display panel. This feature must be enabled. Refer to the System Power Mode item in Power Saver Utility described in the Control Panel. Open Performance and Maintenance and open TOSHIBA Power Saver. 3. Press the power button. This feature must be enabled. Refer to the System Power Mode item in Power Saver Utility described in the Control Panel. -
Page 66: Restoring The Preinstalled Software
1. Load the Product Recovery disk in the optical media drive and turn off the computer’s power. 2. Hold down the F12 key and turn on the power. When the TOSHIBA logo appears, release the F12 key. 3. Use the left or right cursor key to select the CD-ROM/DVD-ROM icon in the displayed menu. -
Page 67: Chapter 4 Operating Basics
Operating Basics Satellite Pro A10 Series Chapter 4 Operating Basics This chapter gives information on basic operations including using the Touch pad, USB diskette drive, optical media drives, the internal modem, Wireless LAN and LAN. It also provides tips on caring for your computer, diskettes and CD/DVDs. -
Page 68: Using The Usb Diskette Drive
Operating Basics Two buttons below the keyboard are used like the buttons on a mouse pointer. Press the left button to select a menu item or to manipulate text or graphics designated by the pointer. Press the right button to display a menu or other function depending on the software you are using. -
Page 69: Disconnecting 3 ½" Diskette Drive
Operating Basics Disconnecting 3 ½" diskette drive When you have finished using the diskette drive, follow the procedures below to disconnect it: 1. Wait for the indicator light to go out to make sure all diskette activity has stopped. If you disconnect the diskette drive or turn off the power while the computer is accessing the drive you may lose data or damage the diskette or the drive. - Page 70 Operating Basics b. Pressing the eject button will not open the drawer when the CD-RW/DVD-ROM drive’s power is off. If the power is off, you can open the drawer by inserting a slender object (about 15 mm) such as a straightened paper clip into the eject hole just to the right of the eject button.
- Page 71 Operating Basics 3. Lay the CD/DVD, label side up, in the drawer. Inserting a CD/DVD When the drawer is fully opened, the edge of the computer will extend slightly over the CD/DVD tray. Therefore, you will need to turn the CD/DVD at an angle when you place it in the tray.
- Page 72 Operating Basics 4. Press gently at the centre of the CD/DVD until you feel it click into place. The CD/DVD should lie below the top of the spindle, flush with the spindle base. 5. Push the centre of the drawer to close it. Press gently until it locks into place.
-
Page 73: Removing Discs
Operating Basics Removing discs To remove the CD/DVD, follow the steps below and refer to the figure below. Do not press the eject button while the computer is accessing the Fixed CD-RW/DVD-ROM drive. Wait for the Disk indicator to go out before you open the drawer. -
Page 74: Writing Cds On Cd-Rw/Dvd-Rom Drive
Hitachi Maxell Ltd. CD-RW: MITSUBISHI CHEMICAL CORPORATION RICOH Co., Ltd. TOSHIBA has confirmed the operation of CD-R and CD-RW media of the manufacturers above. Operation of other media cannot be guaranteed. ■ CD-RW can generally be rewritten about 1,000 times. However, the actual number of rewrites is affected by the quality of the media and the way it is used. -
Page 75: When Writing Or Rewriting
Operating Basics When writing or rewriting Note the following when you write or rewrite a CD-R or CD-RW. ■ Always copy data from the HDD to the CD. Do not use cut-and-paste. The original data will be lost if there is a write error. ■... -
Page 76: Writing Cds/Dvds On Dvd-R/-Rw Drive
DVD-R/-RW drive may not function properly, and you may fail to write or rewrite, lose data or incur other damage. Disclaimer TOSHIBA does not bear responsibility for the following: ■ Damage to any CD-R/-RW or DVD-R/-RW disc that may be caused by writing or rewriting with this product. -
Page 77: Read/Write Function Chart
Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD-R/-RW and DVD-R/-RW disc. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates. -
Page 78: Before Writing Or Rewriting
Operating Basics ■ Data deleted (erase) from a CD-RW and DVD-RW disc cannot be recovered. Check the content of the disc carefully before you delete it. If multiple drives that can write data to discs are connected, be careful not to delete data from the wrong drive. ■... -
Page 79: When Writing Or Rewriting
Operating Basics When writing or rewriting Please observe/consider the following when you write or rewrite to a CD-R/-RW or DVD-R/-RW disc. ■ Do not perform any of the following actions when writing or rewriting: ■ Operate the computer for any other function, including using a mouse or Touch Pad or closing/opening the LCD panel. -
Page 80: Data Verification
Operating Basics Data Verification To verify that data is written or rewritten correctly, follow the steps below before you write or rewrite a Data CD/DVD. 1. Right-click Data BOX and select Options to display the DATA DISC Option window. 2. Mark the Record and Verify check box and select Byte compare. 3. -
Page 81: Diskettes
Operating Basics Diskettes Store your diskettes in the container they came in to protect them and keep them clean. If a diskette is dirty, do not use cleaning fluid. Clean it with a soft damp cloth. 1. Do not slide back the diskette’s protective metal covering or touch the diskette’s magnetic surface. -
Page 82: Region Selection
To select a region, follow the steps below. 1. Click start, point to All Programs, point to TOSHIBA Internal Modem and click Region Select Utility. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available. -
Page 83: Properties Menu
Operating Basics Properties menu Click the icon with the secondary mouse button to display the following menu. The menu list Setting You can enable or disable the following settings: AutoRun Mode The Region Select utility starts automatically when you start up the operating system. -
Page 84: Connecting
Operating Basics Connecting To connect the internal modem cable, follow the steps below. 1. Plug one end of the modular cable into the modem jack. 2. Plug the other end of the modular cable into a telephone jack. Connecting the internal modem Do not pull on the cable or move the computer while the cable is connected. -
Page 85: Wireless Lan
LAN to cause illegal intrusion, eavesdropping, and loss or destruction of stored data. TOSHIBA strongly recommend the customer to enable the WEP function. 2. TOSHIBA is not liable for the eavesdropping of data due to the use of wireless LAN and the damage thereof. Wireless communication switch You can enable or disable wireless LAN function, with the on/off switch. -
Page 86: Wireless Communication Indicator
W-LAN. Open or click the following: start, Control Panel, System, Hardware Device Manager, Network adaptors, TOSHIBA Wireless LAN Mini PCI Card and enable. The computer has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T) and Fast Ethernet LAN (100 megabits per second, 100BASE-Tx). -
Page 87: Connecting A Lan Cable
Operating Basics Connecting a LAN cable The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer’s default settings could cause a malfunction in LAN operation. Check with your LAN administrator regarding set-up procedures. If you are using Fast Ethernet LAN (100 megabits per second, 100BASE- TX), be sure to connect with a CAT5 cable. -
Page 88: Disconnecting Lan Cable
Operating Basics Disconnecting LAN cable To disconnect the LAN cable, follow the steps below. Make sure the LAN Active indicator (orange LED) is out before you disconnect the computer from the LAN. 1. Pinch the lever on the connector in the computer’s LAN jack and pull out the connector. -
Page 89: Heat Dispersal
CPU speed. Or, by lowering the CPU speed first, then if necessary, turning on the fan. Use the Cooling Method item of the Power Save Mode window in TOSHIBA Power Saver. Maximum Turn on the fan first, then if necessary, lower the Performance CPU processing speed. -
Page 90: Chapter 5 The Keyboard
The Keyboard Satellite Pro A10 Series Chapter 5 The Keyboard The computer’s keyboard layouts are compatible with a 101/102-key enhanced keyboard. By pressing some keys in combination, all the 101/102-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with. -
Page 91: F1...F12 Function Keys
American keyboard driver. Soft keys: Fn key combinations The Fn (function) is unique to TOSHIBA computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features. -
Page 92: Emulating Keys On Enhanced Keyboard
The Keyboard Emulating keys on enhanced keyboard PrtSc Pause Scroll SysReg lock Break & Bk Sp PgUp Home Lock PgDn Home PgUp Enter CapsLock < > Shift Shift PgDn Enter Ctrl Ctrl A 101-key enhanced keyboard layout The keyboard is designed to provide all the features of the 101-key enhanced keyboard, shown above. -
Page 93: Hot Keys
The Keyboard Hot keys Hot keys (Fn + a function or Esc key) let you enable or disable certain features of the computers. Sound mute: Pressing Fn + Esc in a Windows environment turns sound on or off. When you press these hot keys, the current setting will change and be displayed as an icon. -
Page 94: Fn Sticky Key
Fn Sticky key You can use the TOSHIBA Accessibility Utility to make the Fn key sticky, that is, you can press it once, release it, and then press an “F number” key. To start the TOSHIBA Accessibility Utility, click start, point to All Programs, point to TOSHIBA Utilities and click Accessibility. -
Page 95: Windows Special Keys
The Keyboard Windows special keys The keyboard provides two keys that have special functions in Windows : one activates the start menu and the other has the same function as the secondary mouse button. This key activates the Windows start menu. This key has the same function as the secondary mouse button. -
Page 96: Temporarily Using Normal Keyboard (Overlay On)
The Keyboard Numeric mode To turn on the Numeric mode, press Fn + F11. The Numeric mode F11 indicator lights. Now try numeric data entry using the keys shown below. Press Fn + F11 again to turn off the overlay. The numeric keypad overlay Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard... -
Page 97: Temporarily Using Overlay (Overlay Off)
The Keyboard Temporarily using overlay (overlay off) While using the normal keyboard, you can temporarily use the keypad overlay without turning it on: 1. Press and hold down Fn. 2. Check the keyboard indicators. Pressing Fn turns on the most recently used overlay. -
Page 98: Chapter 6 Power And Power-Up Modes
Power and Power-Up Modes Satellite Pro A10 Series Chapter 6 Power and Power-Up Modes The computer’s power resources include the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes. -
Page 99: Power Indicators
Power and Power-Up Modes Power on Power off (no operation) AC adaptor Battery charge • Operates — is above low • LED: Battery off connected battery trigger DC IN off point Battery charge • Operates is below low • LED: Battery flashes —... -
Page 100: Dc In Indicator
Power and Power-Up Modes DC IN indicator Check the DC IN indicator to determine the power status from the AC adaptor connected: Green Indicates the universal AC adaptor is connected and supplying proper power to the computer. Flashing orange Indicates a problem with the power supply. Plug the universal AC adaptor into another outlet. -
Page 101: Battery Types
Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. Do not remove the battery pack while the computer is in Standby mode. Data is stored in RAM, so if the computer loses power it will be lost. When... -
Page 102: Real Time Clock Battery
Press [F1] key to set Date/Time. The computer’s RTC battery is a lithium ion battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of. - Page 103 Never use the computer again until it has been checked by a TOSHIBA service provider. It might generate smoke or fire, or the battery pack might rupture. 3. Make sure the battery is securely installed in the computer before attempting to charge the battery pack.
- Page 104 2. Never dispose of battery packs with normal trash. Bring them to your TOSHIBA dealer or to another recycling centre to save resources and prevent environmental damage. Cover the terminals with electrical tape to prevent short-circuits, which could cause the battery pack to ignite or rupture.
-
Page 105: Charging The Batteries
The computer enters Hibernate mode only if Hibernation is enabled in two places in TOSHIBA Power Saver: the Hibernate window and the Battery Alarm item of the Alarm window. You must recharge a battery pack when it becomes discharged. -
Page 106: Monitoring Battery Capacity
Therefore, an often used, older battery will not operate for as long as a new battery even when both are fully charged. In this case, Power Save Modes window in TOSHIBA Power Saver will indicate a 100% charge for both the old and new battery, but the displayed estimated time remaining will be shorter for the older battery. -
Page 107: Maximising Battery Operating Time
■ How you configure the computer (for example, whether you enable battery-power saving options). The computer provides a battery save mode, which can be set in TOSHIBA Power Saver, to conserve battery power. This mode has the following options: ■... -
Page 108: Extending Battery Life
Power and Power-Up Modes Extending battery life To maximise the life of your battery pack: ■ At least once a month, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges. Before doing so, follow the steps below. -
Page 109: Removing The Battery Pack
(direction opposite to the battery), then slide out the battery pack. Releasing the battery pack For environmental reasons, do not throw away a spent battery pack. Please return spent battery packs to your TOSHIBA dealer. Satellite Pro A10 Series 6-12... -
Page 110: Installing The Battery Pack
Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. Do not touch the latch while holding the computer. Or you may get injured by the dropped battery by unintentional release of the latch. -
Page 111: Starting The Computer By Password
Refer also to the sections Turning on the power and Turning off the power in Chapter 3, Getting Started. Windows utilities You can specify the setting in TOSHIBA Power Saver. Hot keys You can use hot keys Fn + F3 to enter Standby mode and Fn + F4 to enter Hibernation. -
Page 112: Panel Power Off
Power and Power-Up Modes Panel power off You can set up your computer so that power turns off automatically when you close the display panel. When you open the panel, power turns on in Standby or Hibernation mode but not in boot mode. If the panel power off function is enabled and you use Shut down Windows, do not close the display until the shut down function is completed. -
Page 113: Chapter 7 Hw Setup And Passwords
Parallel/Printer. Some models are not equipped with Parallel/Printer tab and/or CPU tab. Accessing HW Setup To run HW Setup, click start, click Control Panel and select TOSHIBA HW Setup. HW Setup window The HW Setup window contains the following tabs: Password, General, Device Config, Parallel/Printer, Display, CPU, Boot Priority, Keyboard, USB and LAN. -
Page 114: Password
HW Setup and Passwords General This window displays the BIOS version and contains two buttons: Default and About. Setup This field displays BIOS Version and date. Default Click Default to return all HW Setup values to the factory settings. About Click About to display the HW Setup version. - Page 115 HW Setup and Passwords If they do not match, the following message appears. You must repeat from step 1. Entry Error!!! To delete a user password: 1. Select Not Registered to display the following prompt: Enter Password: 2. Enter the currently registered password. The character string you enter is displayed as a string of asterisks.
-
Page 116: Device Config
HW Setup and Passwords Key FD After you set a password, you can create a Key FD (diskette). If you forget the user password, the Key FD lets you bypass the password function. It is a good idea to create more than one Key FD in case a Key FD is damaged or lost. - Page 117 HW Setup and Passwords Display This tab lets you customize your computer’s display settings for either the internal LCD screen or for an external monitor. Power On Display Lets you use the display to be used when the computer is booted. (This setting is only available on Standard VGA mode and not available on Windows Desktop) Auto-Selected...
-
Page 118: Boot Priority
HW Setup and Passwords Boot Priority Boot Priority Options This option sets the priority for booting the computer. Select from the following settings: HDD -> FDD -> The computer looks for bootable files in the CD-ROM -> LAN following order: HDD, diskette drive, CD-ROM and LAN. - Page 119 HW Setup. Support of PDA (ATA) card boot is guaranteed only for TOSHIBA PC card HDDs. A PDA (ATA) card takes the position of HDD in the Boot Priority Options list.
- Page 120 HW Setup and Passwords Keyboard Wake-up on Keyboard When this feature is enabled and the computer is in Standby mode, you can turn on the computer by pressing any key. It is effective only for the internal keyboard and only when the computer is in standby mode. Enabled Enables the Wake-up on Keyboard.
-
Page 121: Supervisor Password
Supervisor password Refer to the readme file of the Supervisor Password Utility for instructions on setting the Supervisor Password. The path to the readme file is C:\Program Files\TOSHIBA\Windows Utilities\SVPWTool. In the SVPWTool directory, open the readme.htm file. Satellite Pro A10 Series... -
Page 122: Chapter 8 Optional Devices
Satellite Pro A10 Series Chapter 8 Optional Devices Optional devices can expand the computer’s capabilities and its versatility. This chapter describes connection or installation of the following devices, which are available from your TOSHIBA dealer: Cards/memory ■ PC cards ■... -
Page 123: Pc Cards
The computer is equipped with a PC card expansion slot that can accommodate one 5 mm Type II card. Any PC card that meets industry standards (manufactured by TOSHIBA or other vendor) can be installed. The slot supports 16-bit PC cards, including PC card 16’s multifunction card and CardBus PC cards. -
Page 124: Removing A Pc Card
Optional Devices Removing a PC card To remove the PC card, follow the steps below. 1. Click the Safety Remove Hardware icon on the Task Bar. 2. Click PC card. 3. Press the PC card eject button to extend it. 4. -
Page 125: Memory Expansion
RAM. This section describes how to install and remove a memory module. Use only memory modules approved by TOSHIBA. Do not try to install or remove a memory module under the following conditions. You can damage the computer and the module. Also, data will be lost. -
Page 126: Installing Memory Module
Optional Devices Installing memory module Follow the steps below to install a memory module. 1. Set the computer to boot mode and turn off the power. 2. Remove all cables connected to the computer. 3. Turn the computer upside down and remove the battery pack (refer to Chapter 6, Power and Power-Up Modes). - Page 127 Optional Devices 7. Push the module down so it lies flat. Latches on either side will click into place to secure the module. Installing the memory module 8. Seat the cover and secure it with a screw. 9. Replace the battery pack as described in Chapter 6, Power and Power-Up Modes.
-
Page 128: Removing Memory Module
Optional Devices Removing memory module To remove the memory module, make sure the computer is in boot mode then: 1. Be sure the power is off and all cables are disconnected from the computer. 2. Turn the computer upside down and remove the battery and a screw securing the memory module cover. -
Page 129: Battery Pack
Optional Devices Battery pack You can increase the portability of the computer with additional battery packs. If you’re away from an AC power source and your battery runs low, you can replace it with a freshly charged battery. See Chapter 6, Power and Power-Up Modes. - Page 130 Optional Devices Some models are equipped with TV out port. You can connect a television set to the TV out jack on the computer. Follow the steps below. 1. Turn the computer off. 2. Use the TV adaptor cable's S-Video plug (not supplied) to connect the television to the TV out port.
-
Page 131: Changing The Resolution To 640X480 For Tv
Optional Devices Changing the resolution to 640x480 for TV If you want to change the resolution into 640x480 because it is difficult to read characters on TV, follow the steps below. 1. Open Display properties and select the Settings tab. 2. -
Page 132: Security Lock
Optional Devices 4. Select a resolution from the menu. Resolution menu Security lock A security lock enables you to anchor your computer to a desk or other heavy object to help prevent unauthorized removal of the computer. Attach one end of a cable to the desk and the other end to the security lock slot on the back side of the computer. -
Page 133: Chapter 9 Troubleshooting
Satellite Pro A10 Series Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring. -
Page 134: Preliminary Checklist
Troubleshooting Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. ■ Make sure you turn on all peripheral devices before you turn on the computer. -
Page 135: Hardware And System Checklist
Troubleshooting Software The problems may be caused by your software or disk. If you cannot load a software package, the media may be damaged or the program might be corrupted. Try loading another copy of the software. If an error message appears while you are using a software package, check the software documentation. -
Page 136: System Start-Up
This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system, depending on how the Boot Priority is set in the TOSHIBA HW Setup program. If any of the following conditions are present, the self test failed: ■... -
Page 137: Overheating Power Down
Troubleshooting Overheating power down If the computer’s internal temperature becomes too high, the computer will automatically shut down. Problem Procedure Computer shuts down Leave the computer off until it reaches room and DC IN indicator temperature, then turn it back on. flashes orange If the computer is still too warm, the DC IN indicator will continue blinking when you turn on... -
Page 138: Password
If you do not think the battery is at the end of its operating life, see your dealer. Battery doesn’t power Check the power consumption settings in the computer as long TOSHIBA Power Saver Utility. Consider using a as expected power saving mode. Password Problem... -
Page 139: Keyboard
Troubleshooting Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, The Keyboard. Problem Procedure Some letter keys Check that the numeric keypad overlay is not produce numbers selected. Press Fn + F10 and try typing again. Output to screen is Make sure the software you are using is not garbled... -
Page 140: Hard Disk Drive
Troubleshooting Hard disk drive Problem Procedure Computer does not Check if a diskette is in the diskette drive or a boot from hard disk CD-ROM is in the optical media drive. Remove drive any diskette and/or CD-ROM and check Boot priority. -
Page 141: Cd-Rw/Dvd-Rom Drive
Troubleshooting Problem Procedure Some CD/DVDs run The software or hardware configuration may be correctly, but others do causing a problem. Make sure the hardware configuration matches your software’s needs. Check the CD/DVD’s documentation. Check the type of CD/DVD you are using. The drive supports: DVD-ROM: DVD-ROM, DVD-Video CD-ROM:... - Page 142 Chapter 2, The Grand Tour. Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■...
-
Page 143: Diskette Drive
Troubleshooting Diskette drive For more information, refer to Chapter 4, Operating Basics. Problem Procedure Drive does not There may be a faulty cable connection. Check operate the connection to the computer and to the drive. You cannot access Try another diskette. If you can access the the external 3 ½"... -
Page 144: Pointing Device
Troubleshooting Pointing device If you are using a USB mouse, also refer to the USB section in this chapter and to your mouse documentation. Touch pad Problem Procedure On-screen pointer The system might be busy. If the pointer is does not respond to shaped as an hourglass, wait for it to resume its pad operation normal shape and try again to move it. -
Page 145: Usb
Troubleshooting Problem Procedure Try changing the speed setting in the mouse The mouse pointer control utility. moves too fast or too slow 1. Open the Control Panel, select the Mouse icon and press Enter. 2. Click the Pointer Options tab. 3. -
Page 146: Sound System
Troubleshooting Sound system Refer also to documentation for your audio devices. Problem Procedure No sound is heard Adjust the volume control dial. Check the software volume settings. Make sure the headphone connection is secure. If problems persist, contact your dealer. Annoying sound is You may be experiencing feedback. -
Page 147: Modem
Troubleshooting Modem Problem Procedure Communication Make sure the computer’s internal modem software can’t initialize settings are correct. Refer to Phone and Modem modem Properties in the Control Panel. You can hear a dial If the call is going through a PBX machine, make tone but can’t make a sure the communication application’s tone dial call... -
Page 148: Lan
Troubleshooting Problem Procedure Cannot access LAN Check for a firm cable connection between the LAN jack and the LAN HUB. Wake-up on LAN does Make sure the AC adaptor is connected. The not work Wake-up on LAN function consumes power even when the system is off. -
Page 149: If You Need Further Assistance
They are your best sources for current information and support. Where to write If you are still unable to solve the problem and suspect that it is hardware related, write to TOSHIBA at the nearest location listed in appendix C. Satellite Pro A10 Series 9-17... -
Page 150: Appendix A Specifications
Specifications Satellite Pro A10 Series Appendix A Specifications This appendix summarises the computer’s technical specifications. Environmental Requirements Conditions Ambient Relative humidity temperature 5°C (41°F) to 35°C 20% to 80% Operating (95°F) Non-operating -20°C (-4°F) to 65°C 10% to 95% (149°F) Thermal Gradient 20°C per hour maximum Wet-bulb... - Page 151 Specifications Built-in Modem Network control unit (NCU) Type of NCU Type of line Telephone line (analogue only) Type of dialling Pulse Tone Control command AT commands EIA-578 commands Monitor function Computer’s speaker Communication specifications Communication Data: Full duplex system Fax: Half duplex Communication Data...
- Page 152 This product is approved for electrical safety and/or electromagnetic compatibility (EMC) by the following associations: TÜV DIN GOST TÜV TOSHIBA declares that this product complies with the following directives to be observed for CE marking. CE-Marking is the responsibility of TOSHIBA Europe, Hammfelddamm 8, 41460 Neuss, Germany. 93/68/EEC...
-
Page 153: Appendix B Ac Power Cord And Connectors
AC Power Cord and Connectors Satellite Pro A10 Series Appendix B AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. - Page 154 AC Power Cord and Connectors Germany: Italy: The Netherlands: KEMA Norway: NEMKO Sweden: SEMKO Switzerland: United Kingdom: In Europe, power cords must be VDE type, H05VVH2-F and two conductor. For the United States and Canada, plug configuration must be a 2-15P (250 V) or 1-15P (125 V) as designated in the U.S.
-
Page 155: Appendix C The Toshiba International Warranty
The cover is assured in major industrial countries of the world. It means that wherever you take your TOSHIBA mobile PC in this area, you will never be left without help should any problems arise. - Page 156 Estonia ServiceNet Tel: +372-6504-949 Pärnu str. 142 Fax: +372-6504-948 11317 Tallinn http://www.servicenet.ee Finland Scribona Suomi OY / Toshiba Digital Media Tel: +358-9-5272555 Sinimäentie 8A,P.O.Box 83 Fax: +358-9-5272500 02630 ESPOO http://www.toshiba-dm.com France Toshiba Systèmes (France) S.A. Tel.: +33-8 92 69 70 92 7 Rue Ampère ;...
- Page 157 Tel: +36-1-467 6100 Öv u, 185, Fax: +36-1-252 6470 1147 Budapest http://www.technotrade.hu Ireland Toshiba Information Systems (U.K.) Limited, Tel.: +353 (0)1248 1 248 Toshiba Court, Weybridge Business Park, Fax: + 44 (0)8702 202 303 Addlestone Road, Weybridge, Surrey KT15 2UL www.toshiba.co.uk/computers/...
- Page 158 The TOSHIBA International Warranty Norway Scribona Norway A/S Tel: +47-22-897-189 Stålfjæra 20, P.O.Box 51, Kalbakken Fax: +47-22-897-166 0901 Oslo http://www.toshiba-dm.com Oman Bahwan IT Tel.: + 968 790191-117 Sarco Building, Ground Floor No. 459, Way Fax: +968-790 192 (Sultanate of Oman) No.
- Page 159 Tel: +44-(0)8702 202202 Kingdom Toshiba Court, Weybridge Business Park Fax: + 44-(0)8702 202303 Addlestone Road, Weybridge www.toshiba.co.uk/computers/ Surrey KT15 2UL United States Toshiba America Information Systems, Inc. Tel: +1-949-583-3000 9740 Irvine Blvd., P.O. Box 19724 Fax: +1-949-583-3345 Irvine, CA 92713-9724 http://www.toshiba.com Yugoslavia CT Computers d.o.o.
- Page 160 The TOSHIBA International Warranty TOSHIBA addresses for the Internet/World Wide Web TOSHIBA Europe TOSHIBA Japan http://www.toshiba-europe.com http://www.toshiba.co.jp TOSHIBA America TOSHIBA Canada http://www.toshiba.com http://www.toshiba.ca Satellite Pro A10 Series...
-
Page 161: Appendix D Keyboard Layouts
Keyboard Layouts Satellite Pro A10 Series Appendix D Keyboard Layouts Arabic Belgian User's Manual Satellite Pro A10 Series... - Page 162 Keyboard Layouts Danish French German Satellite Pro A10 Series...
- Page 163 Keyboard Layouts Greek Hebrew Italian Satellite Pro A10 Series...
- Page 164 Keyboard Layouts Norwegian Polish Portuguese Satellite Pro A10 Series...
- Page 165 Keyboard Layouts Russian Spanish Swedish Satellite Pro A10 Series...
- Page 166 Keyboard Layouts Swiss-German Turkish UK English Satellite Pro A10 Series...
- Page 167 Keyboard Layouts US English Satellite Pro A10 Series...
-
Page 168: Appendix E Display Controller And Modes
Display Controller and Modes Satellite Pro A10 Series Appendix E Display Controller and Modes Display controller The display controller interprets software commands into hardware commands that turn particular pels on or off. The controller is an advanced Video Graphics Array (VGA) that provides Extended Graphics Array (XGA) support for the internal LCD and external monitors. - Page 169 Display Controller and Modes Table 1 Video modes (VGA) Video Type Resolution Character LCD Colours CRT Colours Scanning Mode matrix (pels) frequency Vertical (Hz) 0, 1 40 x 25 8 x 8 16 of 256K 16 of 256K Text Characters 2, 3 80 x 25 8 x 8...
- Page 170 Display Controller and Modes Table 2 Video modes (XGA) Resolution LCD colours CRT colours Vertical frequency (Hz) 640 x 480 256/256K 256/256K 800 x 600 256/256K 256/256K 1024 x 768 256/256K 256/256K 1280 x 1024 256/256K 256/256K (Virtual) 1400 x 1050 256/256K 256/256K (Virtual)
- Page 171 Display Controller and Modes Resolution LCD colours CRT colours Vertical frequency (Hz) 1600 x 1200 64K/64K 64K/64K (Virtual) 1920 x 1440 64K/64K 64K/64K (Virtual) 640 x 480 16M/16M 16M/16M 800 x 600 16M/16M 16M/16M 1024 x 768 16M/16M 16M/16M 1280 x 1024 16M/16M 16M/16M (Virtual)
-
Page 172: Appendix F If Your Computer Is Stolen
What is your address, phone, and fax number? To register the theft, please follow these procedures: ■ Fill in the TOSHIBA Theft Registration form (or a copy of it) below. ■ Attach a copy of your receipt showing where your computer was purchased. -
Page 173: Toshiba Theft Registration
If your computer is stolen TOSHIBA Theft Registration Send to: TOSHIBA Europe GmbH Technical Service and Support Leibnizstr. 2 93055 Regensburg Germany Fax number: +49 (0) 941 7807 925 Country stolen: Machine type: (e.g. Satellite Pro A10) Model number: (e.g. PSA10 YXT) Serial number: (e.g. -
Page 174: Appendix G Ascii Character Codes
ASCII Character Codes Satellite Pro A10 Series Appendix G ASCII Character Codes This appendix shows the American Standard Code for Information Interchange (ASCII) on the following pages. The characters in the IBM char column appear on your display when you type the corresponding ASCII code (as described in Chapter 5, The Keyboard). - Page 175 ASCII Character Codes Sort Ctrl code code char char ¶ § ▲ ▼ Satellite Pro A10 Series...
- Page 176 ASCII Character Codes Sort Sort code code char code code char space “ & ’ < > Satellite Pro A10 Series...
- Page 177 ASCII Character Codes Sort Sort code code char code code char ’ Ç ü é â ä à å ç ê ë è ï î ì Ä Å É æ Æ ô ö ò û ù ÿ Ö Ü ¢ £...
- Page 178 ASCII Character Codes Sort Sort code code char code code char á í ó ú ñ Ñ ¿ ¡ « » Satellite Pro A10 Series...
- Page 179 ASCII Character Codes Sort code code char ß Satellite Pro A10 Series...
-
Page 180: Appendix H Wireless Lan
Satellite Pro A10 Series Appendix H Wireless LAN This appendix describes Wireless LAN features and TOSHIBA Wireless LAN card specifications. For details on Wireless LAN settings, refer to the LAN Card Settings and Client Manager help file. These references have the latest information. -
Page 181: Radio Characteristics
Wireless LAN Radio Characteristics Radio Characteristics of Wireless LAN Cards may vary according to: ■ country/region where the product was purchased ■ Type of product Wireless communication is often subject to local radio regulations. Although Wireless LAN Wireless networking products have been designed for operation in the license-free 2.4GHz and 5GHz band, local radio regulations may impose a number of limitations to the use of wireless communication equipment. - Page 182 Wireless LAN Card may support a different set of 5GHz / 2.4GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in your country/region. Wireless IEEE 802.11 Channels Sets (Revision B)
- Page 183 Wireless LAN Wireless IEEE 802.11 Channels Sets (Revision A) Frequency Range 5150-5850 MHz Note Channel ID 5180 5200 5220 5240 5260 5280 5300 5320 5745 US only *1 5765 US only *1 5785 US only *1 5805 US only *1 *1: Available Area: US (USA, CANADA) only Wireless Channels Sets (Turbo Mode) Frequency Range...
-
Page 184: Appendix I Internal Modem Guide
Internal Modem Guide Satellite Pro A10 Series Appendix I Internal Modem Guide This appendix describes how to install and the remove the internal modem. Do not disassemble the computer beyond the steps described in this instruction or touch any components not specifically described. Installing the internal modem The internal modem is preinstalled. -
Page 185: Removing The Internal Modem
Internal Modem Guide Removing the internal modem To remove the internal modem, follow the steps below. 1. Save your data and turn off the computer. 2. Disconnect the AC adaptor and any other peripheral device. 3. Turn the computer upside down and remove the battery pack. 4. -
Page 186: Glossary
Glossary Satellite Pro A10 Series Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. adaptor: A device that provides an interface between two dissimilar electronic devices. For example, the AC adaptor modifies the power from a wall outlet for use by the computer. - Page 187 Glossary asynchronous: Lacking regular time relationship. As applied to computer communications, asynchronous refers to the method of transmitting data that does not require a steady stream of bits to be transmitted at regular time intervals. AUTOEXEC.BAT: A batch file that executes a series of MS-DOS commands and programs each time you start the computer.
- Page 188 Glossary cache memory: High speed memory which stores data that increases processor speed and data transfer rate. When the CPU reads data from main memory, it stores a copy of this data in cache memory. The next time the CPU needs that same data, it looks for it in the cache memory rather than the main memory, which saves time.
- Page 189 Glossary commands: Instructions you enter at the terminal keyboard that direct the actions of the computer or its peripheral devices. communications: The means by which a computer transmits and receives data to and from another computer or device. Compact Flash: A small removable mass storage device, designed with flash technology, a non-volatile storage solution that does not require a battery to retain data indefinitely.
- Page 190 Glossary data bits: A data communications parameter controlling the number of bits (binary digits) used to make up a byte. If data bits = 7 the computer can generate 128 unique characters. If data bits = 8 the computer can generate 256 unique characters. data: Information that is factual, measurable or statistical that a computer can process, store, or retrieve.
- Page 191 Glossary echo: To send back a reflection of the transmitted data to the sending device. You can display the information on the screen, or output it to the printer, or both. When a computer receives back data it transmitted to a CRT (or other peripheral device) and then retransmits the data to printer, the printer is said to echo the CRT.
- Page 192 See also software and firmware. HW Setup: A TOSHIBA utility that lets you set the parameters for various hardware components. hertz: A unit of wave frequency that equals one cycle per second.
- Page 193 Glossary infrared port: A cableless communications port capable of using infrared signals to send serial data. input: The data or instructions you provide to a computer, communication device or other peripheral device from the keyboard or external or internal storage devices. The data sent (or output) by the sending computer is input for the receiving computer.
- Page 194 100,000 simple logic gates on a single chip. 2) An integrated circuit that uses the large scale integration. magiCDisc: A TOSHIBA utility that lets you create a CD-ROM data base for quick access to CD-ROM data. main board: See motherboard.
- Page 195 Glossary modem: Derived from modulator/demodulator, a device that converts (modulates) digital data for transmission over telephone lines and then converts modulated data (demodulates) to digital format where received. monitor: A device that uses rows and columns of pixels to display alphanumeric characters or graphic images.
- Page 196 The electrical connection through which the computer sends and receives data to and from devices or other computers. Power Saver Utility: A TOSHIBA utility that lets you set the parameters for various power-saving functions. printed circuit board (PCB): A hardware component of a processor to which integrated circuits and other components are attached.
- Page 197 A Class A device is sufficient for office use. Class B provides a more stringent classification for home equipment use. TOSHIBA portable computers comply with Class B computing device regulations. RAMDRIVE: Part of the computer’s random access memory assigned to simulate a disk.
- Page 198 Glossary SCSI: Small Computer System Interface is an industry standard interface for connection of a variety of peripheral devices. SD cards: Secure Digital cards are flash memory widely used in a variety of digital devices such as digital cameras and Personal Digital Assistants.
- Page 199 TFT: Thin Film Transistor. A color LCD technology that applies individual transistors to each pixel enabling fine display control and excellent screen legibility. touch pad: A pointing device integrated into the TOSHIBA computer palm rest. TTL: Transistor-transistor logic. A logic circuit design that uses switching transistors for gates and storage.
-
Page 200: Index
Index Satellite Pro A10 Series Index AC adaptor, 1-4, 2-14 DC IN additional, 1-11 indicator, 6-3 connecting, 3-5 DC IN 15V, 2-5 ASCII characters, 5-8, G-1 Diskette drive, 2-10 Display, 1-5, 2-7 opening, 3-6 Battery Display controller, E-1 battery pack, 6-4 Documentation, 1-2 care and use of, 6-5 DVD-R/-RW drive, 2-13... - Page 201 Index Fn + Ctrl, 5-3 Keyboard, 1-5, 7-8 Fn + Enter, 5-3 F1...F12 function keys, 5-2 Fn + Esc (Sound mute), 5-4 Typewriter keys, 5-1 Fn + F1 (Instant security), 5-4 Windows special keys, 5-6 Fn + F10 (Arrow mode), 5-3 Keyboard indicators, 2-9 Fn + F11 (Numeric mode), 5-3 Keypad overlay, 5-6...
- Page 202 9-2 Real Time Clock, 9-16 Video modes, E-1 self test, 9-4 Video RAM, 1-3 Sound system, 9-14 Video-out jack, 1-6 support from TOSHIBA, 9-17 Volume control, 2-1 system start-up, 9-4 USB, 9-13 Wireless LAN, 9-16 Wireless communication Processor, 1-3...