Toshiba PORTÉGÉ A600 Maintenance Manual page 276

4 Replacement Procedures
2. Open the insulator and take out the RJ45 wire harness from the slot.
3. Disconnect the USB board FPC from the connector CN9610 on the USB board.
4. Open the insulator and disconnect the sensor harness from the connector CN9540
on the USB board and connector CN9630 on the SW board.
5. Disconnect the camera harness from the connector CN9620 on the USB board.
6. Remove the following screw and USB board.
• M2×3B
CN9620
4-48
Downloaded from www.Manualslib.com
S-THIN HEAD
Sensor harness
Insulator
Camera harness
Insulator
CN9630
Figure 4-27 Removing the USB board/WL SW holder (2)
[CONFIDENTIAL]
manuals search engine
4.20 USB board/WL SW holder
×1
M2x3B S-THIN HEAD
USB board
Knob
Slot
USB board FPC
PORTÉGÉ A600 Maintenance Manual (960-710)
CN9610
CN9540
RJ45 wire harness