Toshiba PORTÉGÉ A600 Maintenance Manual page 131

3.2 Executing the Diagnostic Test
NOTE: The menu displayed by your computer may be slightly different from the one
Select the desired subtest number from the subtest menu and press Enter. The following
message will appear:
Use the right and left arrow keys to move the cursor to the desired option.
Selecting YES of TEST LOOP increases the pass counter by one, each time the test cycle
ends and restarts the test cycle.
Selecting NO returns the process to the subtest menu after the test is complete.
PORTEGE A600 Maintenance Manual (960-710)
Downloaded from www.Manualslib.com
Select the option you want to execute and press Enter. When you select 1-
SYSTEM TEST, the following message will appear:
SYSTEM TEST NAME
SUB-TEST : XX
PASS COUNT : XXXXX
WRITE DATA : XX
ADDRESS : XXXXXX
SUB-TEST MENU :
01 - ROM checksum
02 – Fan ON/OFF
03 - Geyserville
04 - Quick charge
05 - DMI read
99 - Exit to DIAGNOSTIC TEST MENU
shown above.
TEST LOOP : YES (or NO)
ERROR STOP : YES (or NO)
manuals search engine
XXXXXX xxxxxxx DIAGNOSTIC TEST VX.XX
[Ctrl]+[Break] : test end
[Ctrl]+[C]
ERROR COUNT: XXXXX
READ DATA : XX
STATUS : XXX
[CONFIDENTIAL]
3 Tests and Diagnostics
: key stop
3-7