Floppy Disk Test - Toshiba PORTÉGÉ A600 Maintenance Manual

3.10 Floppy Disk Test

3.10 Floppy Disk Test
CAUTION: Before running the floppy disk test, prepare a formatted work disk. Remove
To execute the Floppy Disk Test, select 5 from the DIAGNOSTIC TEST MENU, press
Enter and follow the directions displayed on the screen.
1. The following message will appear. Select the media mode and start track to be tested,
then press Enter.
2. The Floppy Disk test contains five subtests that test the FDD.
The floppy disk test menu will appear after you select FDD test parameters.
PORTEGE A600 Maintenance Manual (960-710)
Downloaded from www.Manualslib.com
the Diagnostics Disk and insert the work disk into the FDD. The contents of
the floppy disk will be erased.
Test start track
FLOPPY DISK
SUB-TEST : XX
PASS COUNT : XXXXX
WRITE DATA : XX
ADDRESS : XXXXXX
SUB-TEST MENU :
01 - Sequential read
02 - Sequential read/write
03 - Random address/data
04 - Write specified address
05 - Read specified address
99 - Exit to DIAGNOSTIC TEST MENU
manuals search engine
(Enter:0/dd:00-79) ?
XXXXXXX XXX DIAGNOSTIC TEST VX.XX
[Ctrl]+[Break] :
[Ctrl]+[C]
ERROR COUNT
READ DATA
STATUS
[CONFIDENTIAL]
3 Tests and Diagnostics
test end
: key stop
: XXXXX
: XX
: XXX
3-21