Toshiba PORTÉGÉ A600 Maintenance Manual page 261

4.13 3G card
Installing the 3G card
To install the 3G card, follow the steps below and refer to Figure 4-17.
1. Connect the 3G FPC to the connector CN2750 on the system board and secure it
2. Insert the 3G card to the connector on the 3G FPC slantwise.
3. Press the 3G card down and secure it with the following screws.
4. Connect the 3G antenna cables to the connectors on the 3G card.
5. Arrange the 3G antenna cables in place.
PORTÉGÉ A600 Maintenance Manual (960-710)
Downloaded from www.Manualslib.com
with following screws.
• M2×4C
BIND screw
• M2×3B
S-THIN HEAD screw
manuals search engine
4 Replacement Procedures
×3
×2
[CONFIDENTIAL] 4-33