Toshiba PORTÉGÉ A600 Maintenance Manual page 245

4.6 Memory module
Installing the Memory module
To install the memory module, confirm that the computer is shut down. Then follow the steps
below and refer to Figure 4-5 and 4-6.
CAUTION: When installing the memory module, make sure the computer is powered off.
1. Insert the memory module into the connector slantwise and press it to connect firmly.
CAUTION: After installing the memory module, make sure that the memory module is
2. Set the memory cover and secure it with the screw.
3. When the power of the computer is turned on, the computer checks automatically the
4. If the memory is not detected, check that it is connected correctly.
PORTÉGÉ A600 Maintenance Manual (960-710)
Downloaded from www.Manualslib.com
Inserting a memory module with the power on might damage the module or
the computer itself.
Never press hard or bend a memory module.
secured with the left and right latches.
memory size. Confirm that the new memory is detected correctly.
manuals search engine
4 Replacement Procedures
[CONFIDENTIAL] 4-17