Toshiba PORTÉGÉ A600 Maintenance Manual page 265

4.15 HDD/SSD
4.15.1 HDD
Removing the HDD
To remove the HDD, follow the steps below and refer to Figure 4-19.
1. Lift up the HDD from the slot.
2. Disconnect the HDD from the connector on the HDD FPC.
Installing the HDD
To install the HDD, follow the steps below and refer to Figure 4-19.
1. Connect the HDD to the connector on the HDD FPC.
2. Set the HDD into the guides of the slot.
PORTÉGÉ A600 Maintenance Manual (960-710)
Downloaded from www.Manualslib.com
HDD FPC
Figure 4-19 Removing the HDD
manuals search engine
Guide
Guide
[CONFIDENTIAL]
4 Replacement Procedures
HDD
4-37