Toshiba PORTÉGÉ A600 Maintenance Manual page 171

3.20 ONLY ONE TEST
Subtest 7
NOTE: Make sure that this subtest is executed on the following condition:
<Example>
Set the machine
against the vertical plane
with the Front upward
Flat desk
PORTEGE A600 Maintenance Manual (960-710)
Downloaded from www.Manualslib.com
Acceleration sensor
This subtest detects and corrects the each axis (X, Y, Z).
1. Flat desk with vertical plane to get the stability of machine.
2. The vertical wall or plane is necessary.
3. Prevent the machine from shake or shock.
The figure below shows the name and position of each side.
Back
Left side
manuals search engine
Vertical plane
Top
(heaven surface)
Right side
Front
[CONFIDENTIAL]
3 Tests and Diagnostics
3-47