Toshiba PORTÉGÉ A600 Maintenance Manual page 219

10. PCI Bus
11. Display
NOTE: Pressing Fn+F5 changes the display setting in the order of internal LCD to
12. Peripheral
PORTEGE A600 Maintenance Manual (960-710)
Downloaded from www.Manualslib.com
(d) SATA Controller Mode
This feature sets the SATA Controller Mode.
AHCI
Compatibility
This option displays the interrupt level for the Card Bus in the computer. It is for
information only and cannot be changed.
PCI BUS = IRQ10, IRQ11
This group of options configures the computer's display.
(a) Power On Display
This option is used to select the display when booting up.
Auto-Selected
LCD+AnalogRGB
simultaneous to external monitor.
Use this option to select the peripheral's mode.
(a) Internal Pointing Device
This option enables or disables the touch pad
Enabled
Disabled
manuals search engine
Sets AHCI which is the mode for VistaTM (default)
Sets the mode for legacy OS. Use this mode when the
driver corresponding to AHCI is not used.
Selects an external monitor if one is connected.
Otherwise it selects the internal LCD. (Default)
Selects both the internal LCD and the external monitor
for simultaneous display.
Enables the touch pad. (Default)
Disables the touch pad.
[CONFIDENTIAL]
Tests and Diagnostics
3-95