Registering The Default Values Of The Scanner's Initial Display - Ricoh 9050b Operating Instructions Manual

6. Various Scan Settings
Registering the Default Values of the Scanner's
Initial Display
This section explains how to set defaults for the initial screen, which appears when the machine is turned
on or when settings are cleared or reset.
The following settings can be registered as defaults: Scan Settings, 1 Sided/2 Sided Original, Top to Top/
Top to Bottom, 1 Side/2 Sides for the Last Page, Divide, Original Orientation, File Type, Batch/SADF,
Stamp, Store File, Preview, Reception Notice, and Security (E-mail Encryption and Signature).
1. Make the necessary scan settings on the initial screen.
2. Press the [Program] key.
6
3. Press [Program as Defaults].
4. Press [Program].
A confirmation screen appears.
5. Press [Yes].
The current settings are registered as defaults, and then the initial screen reappears.
• To restore the initial screen's original default settings, press [Restore Factory Defaults].
154
BAP040S