Display Boot-Loader - HP FlexFabric 7900 Series Command Reference Manual

Examples
# Enable BootWare image validity check.
<Sysname> system-view
[Sysname] bootrom-update security-check enable

display boot-loader

Use display boot-loader to display current software images and startup software images.
Syntax
In standalone mode:
display boot-loader [ slot slot-number ]
In IRF mode:
display boot-loader [ chassis chassis-number [ slot slot-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
slot slot-number: Specifies the slot number of an MPU. If you do not specify an MPU, this command
displays the software images on each MPU. (In standalone mode.)
chassis chassis-number [slot slot-number ]: Specifies an IRF member device or an MPU in an IRF
member device. The chassis-number argument represents the IRF member ID of the device. The
slot-number argument represents the slot number of the MPU on the device. If you do not specify an
IRF member device, this command displays the software images on each MPU in the IRF fabric. If
you specify an IRF member device without specifying an MPU, this command displays the software
images on each MPU on the specified member device. (In IRF mode.)
Examples
# In standalone mode, display current software images and startup software images.
<Sysname> display boot-loader
Software images on slot 10:
Current software images:
flash:/7900-CMW710-BOOT.bin
flash:/7900-CMW710-SYSTEM.bin
Main startup software images:
flash:/7900-CMW710-BOOT.bin
flash:/7900-CMW710-SYSTEM.bin
flash:/7900-CMW710-SSH.bin
Backup startup software images:
flash:/7900-CMW710-BOOT.bin
flash:/7900-CMW710-SYSTEM.bin
# In IRF mode, display current software images and startup software images.
<Sysname> display boot-loader
165