Tftp Client Ipv6 Source - HP FlexFabric 7900 Series Command Reference Manual

•
interface interface-type interface-number: Specifies an interface by its type and number. The
primary IPv4 address of this interface will be used as the source IPv4 address for outgoing
TFTP packets. Make sure the interface is up and has the primary IPv4 address configured.
Otherwise, the transmission fails.
•
ip source-ip-address: Specifies an IPv4 address. This address must be the IPv4 address of an
interface in up state. Otherwise, the transmission fails.
Usage guidelines
The source address specified with the tftp command takes precedence over the source address
specified with the tftp client source command.
The source address specified with the tftp client source command applies to all TFTP connections.
The source address specified with the tftp command applies only to the current TFTP connection.
Examples
# Download the new.bin file from the TFTP server at 192.168.1.1 and save it as new.bin.
<Sysname> tftp 192.168.1.1 get new.bin
Press CTRL+C to abort.
% Total
100 13.9M
<System>
Table 16 Command output
Field
%
Total
%
Received
%
Xferd
Average Dload
Speed Upload
Related commands
tftp client source

tftp client ipv6 source

Use tftp client ipv6 source to specify the source IPv6 address for TFTP packets sent to an IPv6
TFTP server.
Use undo tftp client ipv6 source to restore the default.
Syntax
tftp client ipv6 source { interface interface-type interface-number | ipv6 source-ipv6-address }
undo tftp client ipv6 source
% Received % Xferd
100 13.9M 0
Average Speed
Dload Upload
0 1206k 0 0:00:11
Description
Percentage of file transmission progress.
Size of files to be transmitted, in bytes.
Percentage of received file size to total file size.
Received file size, in bytes.
Percentage of sent file size to total file size.
Sent file size, in bytes.
Average download speed, in bps.
Average upload speed, in bps.
112
Time Time Time
Total Spent Left
0:00:11 --:--:-- 1206k
Current
Speed