Login Management Commands; Activation-Key - HP FlexFabric 7900 Series Command Reference Manual

Login management commands

The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for
features, commands, and parameters might differ in FIPS mode and non-FIPS mode. For more
information about FIPS mode, see Security Configuration Guide.
Some login management commands are available in both user line view and user line class view:
•
A setting in user line view is applied only to the user line. A setting in user line class view is
applied to all user lines of the class.
•
A non-default setting in either view takes precedence over a default setting in the other view. A
non-default setting in user line view takes precedence over a non-default setting in user line
class view.
•
A setting in user line view takes effect immediately and affects the online user. A setting in user
line class view does not affect online users and takes effect only for users who log in after the
configuration is completed.
Some login management commands are not supported in some user line views but can be
configured in the corresponding user line class views. However, the commands do not take effect.
This chapter provides only remarks about commands that are not supported in user line view.

activation-key

Use activation-key to define a shortcut key for starting a terminal session.
Use undo activation-key to restore the default.
Syntax
activation-key character
undo activation-key
Default
Pressing Enter starts a terminal session.
Views
User line view, user line class view
Predefined user roles
network-admin
mdc-admin
Parameters
character: Specifies the shortcut key. It can be a single character, a key sequence, or the ASCII code
value (in the range of 0 to 127) of the character or key sequence.
Usage guidelines
This command is not supported in VTY line view or VTY line class view.
This command is available in both user line view and user line class view:
•
If the setting in user line view is not the default setting, the setting in user line view takes effect.
•
If the setting in user line view is the default setting but the setting in user line class view is not,
the setting in user line class view takes effect.
To display the shortcut key you have defined, use the display current-configuration | include
activation-key command.
13