Display Role Feature-Group; Feature - HP FlexFabric 7900 Series Command Reference Manual

display role feature-group

Use display role feature-group to display feature group information.
Syntax
display role feature-group [ name feature-group-name ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
name feature-group-name: Specifies a feature group. The feature-group-name argument
represents the feature group name, a case-sensitive string of 1 to 31 characters. If you do not specify
a feature group, the command displays information about all feature groups.
verbose: Displays the commands of each feature in the specified feature group. If you do not specify
a feature group, this keyword enables displaying the commands of each feature in every feature
group. If you do not specify this keyword, the command displays only the feature lists of feature
groups.
Usage guidelines
Feature groups L2 and L3 are predefined feature groups.
Examples
# Display the feature list of feature group L3.
<Sysname> display role feature-group name L3
Feature group: L3
Feature: route
Feature: usr
Feature: ospf
Feature: rip
Feature: isis
Feature: bgp
...
Related commands

feature

role feature-group
feature
Use feature to add a feature to a feature group.
Use undo feature to remove a feature from a feature group.
Syntax
feature feature-name
(Route management related commands)
(Unicast static route related commands)
(Open Shortest Path First protocol related commands)
(Routing Information Protocol related commands)
(ISIS protocol related commands)
(Border Gateway Protocol related commands)
55