Screen-Length - HP FlexFabric 7900 Series Command Reference Manual

[Sysname-line-class-vty] protocol inbound ssh
[Sysname-line-class-vty] line vty 0 4
[Sysname-line-vty0-4] authentication-mode none

screen-length

Use screen-length to set the maximum number of lines to be displayed on a screen.
Use undo screen-length to restore the default.
Syntax
screen-length screen-length
undo screen-length
Default
Up to 24 lines are displayed on a screen.
Views
User line view, user line class view
Predefined user roles
network-admin
mdc-admin
Parameters
screen-length: Specifies the maximum number of lines to be displayed on a screen, in the range of 0
to 512. Setting this argument to 0 disables pausing between screens of output.
Usage guidelines
This command sets the maximum number of lines that can be displayed on one screen when the
screen pause feature is enabled. If the screen pause feature is disabled, the system displays
command output without any pause.
The actual number of lines that can be displayed on a screen is restricted by the display specification
of the configuration terminal. For example, if you set the maximum number of lines for a screen to 40
when the display specification is 24 lines, the device sends 40 lines to the screen at a time, but only
the last 24 lines are displayed on the screen. To view the previous 16 lines, you must press PgUp.
The screen pause feature is enabled by default. To disable this feature, use the screen-length 0 or
screen-length disable command. The screen-length disable command is available in user view.
This command is available in both user line view and user line class view:
•
If the setting in user line view is not the default setting, the setting in user line view takes effect.
•
If the setting in user line view is the default setting but the setting in user line class view is not,
the setting in user line class view takes effect.
Examples
# Set the maximum number of lines to be displayed on a screen to 30 for user line AUX 0.
<Sysname> system-view
[Sysname] line aux 0
[Sysname-line-aux0] screen-length 30
Related commands
screen-length disable
34