Reset Scheduler Logfile - HP FlexFabric 7900 Series Command Reference Manual

# If any configuration has changed, reboot the device but do not save the configuration.
<Sysname> reboot
Start to check configuration with next startup configuration file, please
wait.........DONE!
Current configuration may be lost after the reboot, save current configuration? [Y/N]:n
This command will reboot the device. Continue? [Y/N]:y
Now rebooting, please wait...
# Reboot the device immediately without performing any software check.
<Sysname> reboot force
A forced reboot might cause the storage medium to be corrupted. Continue? [Y/N]:y
Now rebooting, please wait...
# In standalone mode, reboot the interface card in slot 2.
<Sysname> reboot slot 2
This command will reboot the specified slot, Continue? [Y/N]:y
Now rebooting, please wait...
# In standalone mode, reboot the interface card in slot 2 by force.
<Sysname> reboot slot 2 force
A forced reboot might cause the storage medium to be corrupted. Continue? [Y/N]:
Now rebooting, please wait...
# In IRF mode, reboot IRF member device 2.
<Sysname> reboot chassis 2
This command will reboot the specified chassis, Continue? [Y/N]:y
Now rebooting, please wait...
# In IRF mode, reboot IRF member device 2 by force.
<Sysname> reboot chassis 2 force
A forced reboot might cause the storage medium to be corrupted. Continue? [Y/N]:
Now rebooting, please wait...
# In IRF mode, reboot the interface card in slot 2 on IRF member device 2.
<Sysname> reboot chassis 2 slot 2
This command will reboot the specified slot, Continue? [Y/N]:y
Now rebooting, please wait...
# In IRF mode, reboot the interface card in slot 2 on IRF member device 2 by force.
<Sysname> reboot chassis 2 slot 2 force
A forced reboot might cause the storage medium to be corrupted. Continue? [Y/N]:y
Now rebooting, please wait...
Related commands
display system stable state

reset scheduler logfile

Use reset scheduler logfile to clear job execution log information.
Syntax
reset scheduler logfile
Default
None
243