HP FlexFabric 7900 Series Command Reference Manual page 213

1 LSV1QGS12SA1
2 NONE
3 NONE
4 NONE
5 NONE
6 NONE
7 NONE
8 NONE
9 NONE
10 LSVM1SRPC1
11 NONE
The output shows that the device has one MPU (in slot 10), one interface card (in slot 1).
Table 30 Command output
Field Description
Slot No. Slot number of the card.
Brd Type Hardware type of the card.
Card status:
•
•
•
Brd State
•
•
•
Maximum number of subcards that the card supports. The switch does not support
Subslot
subcards.
Sft Ver Software version of the card.
Patch Ver Patch version of the card.
# In IRF mode, display device information about all IRF member devices.
<Sysname> display device
Slot Type
1/0 NONE
1/1 LSV1QGS12SA1
1/2 NONE
1/3 NONE
1/4 NONE
1/5 NONE
1/6 NONE
1/7 NONE
1/8 NONE
1/9 NONE
1/10 LSVM1SRPC1
1/11 NONE
2/0 NONE
2/1 LSV1QGS12SA1
2/2 NONE
Normal 0
Absent 0
Absent 0
Absent 0
Absent 0
Absent 0
Absent 0
Absent 0
Absent 0
Master 0
Fault 0
Standby—The card is the standby MPU or a switching fabric module.
Master—The card is the active MPU or a switching fabric module.
Absent—The slot is not installed with a card.
Fault—The card is faulty and cannot start up.
Normal—The card is an interface card and is operating correctly.
Offline—The card is a switching fabric module and its forwarding plane is in isolated
state.
State Subslot
Absent 0
Normal 0
Absent 0
Absent 0
Absent 0
Absent 0
Absent 0
Absent 0
Absent 0
Absent 0
Master 0
Fault 0
Absent 0
Normal 0
Absent 0
205
7910-2150
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
7910-2150
NONE
Soft Ver
NONE
7910-2150
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
7910-2150
NONE
NONE
7910-2150
NONE
None
None
None
None
None
None
None
None
None
None
None
Patch Ver
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None