Jets; Selecting Desired Massage Action; Waterfall Feature; Clearray On Demand - Jacuzzi J-375 Owner's Manual

J-300
10.7

Jets

The water flow through individual jets in your spa can be
adjusted or turned off by rotating the outside jet ring. Some jets
offer an adjustable center nozzle that allows you to change the
water discharge angle. Simply tilt the center nozzle in these jets
to the desired angle to customize your personal massage. Other
jets offer a spiral action that produces a surging stream of air
and water that provides a vigorous massage.
Note: Always keep at least 6 adjustable jets open at all times to ensure
proper filtration characteristics within the spa.
10.8

Selecting Desired Massage Action

All models incorporate a massage selector valve that allows
you to customize the massage and performance by diverting
water between various jet systems within the spa. Simply turn
valve to positions A, B or C to divert water pressure to various jet groups.
Note: The valve is intended to operate in positions A (Combo), B, or C
for optimum performance. It is considered normal for sound levels within
the valve to increase between these positions due to the large amounts
of water flowing through it. For optimum filtration benefits, always leave
this valve in position A when the spa is covered and select positions B or
C for maximum jet performance during spa use.
10.9

Waterfall Feature

The waterfall feature allows you to independently control
it for a customized soothing effect.
For J335-J385
The waterfall is on when the circulation pump is on. The JETS 1 (
CLEARRAY (
For J315 and J325
The waterfall is on when the jets pump 1 is on.
Waterfall Operation Details:
A. Push thumb wheel on top of waterfall to the left (while in spa) to start
or increase flow.
B. Push thumb wheel on top of waterfall to the right (while in spa) to
slow or turn flow off.
Note: When the waterfall is in the OFF position, some water may still
flow through. This is considered normal.

10.10 CLEARRAY on Demand

The CLEARRAY on demand feature activates the water
purification system for a period of 1-hour. Press the button to
turn the system on. During this time the circulation pump and
the CLEARRAY unit are on.
Note: When the CLEARRAY system is on, due to a programmed or
scheduled setting, the feature cannot be turned off.
30
) buttons will also activate the waterfall feature.
B C
A
) or
1