Selecting Jets Speed; Lock/Unlock Control Panel; Summer Logic (Models Equipped With The Circulation Pump Option); Multicolored Light System Operation (J-Lx/J300 Models, Except 2014 J300S) - Jacuzzi LED Series Manual

Standard troubleshooting approach
Hide thumbs Also See for LED Series:
Table of Contents

Advertisement

5.2 Selecting Jets Speed

Press JETS 1 once for low speed; a second time for high speed; a third time to turn off.
Press JETS 2 (2 Pump Models Only) once for high speed; a second time to turn off.
Note: Anytime a pump has been manually turned on by selecting either jet button, it will automatically turn off
after approximately 20 minutes. If at this time you desire more jet operation, simply turn the jet pump back on.

5.3 Lock/Unlock Control Panel

The control panel temperature display flashes when Lock Mode is active. Lock Mode disables the
jets and underwater light to prevent unauthorized use of the hot tub or disables all hot tub functions
to permit filter cleaning.

5.4 Summer Logic (Models equipped with the Circulation Pump Option)

When water temperature in the hot tub rises to 2°F (1°C) above the temperature setpoint, the hot
tub goes into "summer logic." When this happens, the circulation pump automatically turns off to
prevent heat addition from the pump that would eventually create an overheat condition. The cir-
culation pump, main pump, CLEARRAY and aftermarket ozone (if applicable) will remain off until
the water temperature cools to the set temperature, then reactivate as programmed. This setting
is not user-programmable.
Note: Summer logic does not take effect until the hot tub's water reaches 95°F (35°C) or higher.

5.5 Multicolored Light System Operation (J-LX/J300 Models, except 2014 J300s)

A. Pressing the LIGHT button activates the Footwell, Waterfall, Air Control LED Lights and
Accent lights (for the JLX Models) in sequence as follows: High - Medium - Low - Off.
Anytime the light system has been manually activated, it will automatically turn off after
approximately 2 hours. If at this time you desire more light operation, simply turn the light back on.
B. This button offers four light modes for your enjoyment. Press the LIGHT MODE button to se-
lect your favorite lighting effect as follows:
Press
Once
Press
Again
Press
Again
Press
Again
14
High-Speed Color Blend Mode
Low-Speed Color Blend Mode
Freeze Color Blend Mode:
Selects or "freezes" your low speed blending color of choice.
BLUE (X4) VIOLET (X5) RED (X6)
Solid Color Mode:
Selects one of 7 solid (high-intensity) colors of choice.
AMBER (X7)
GREEN (X8) AQUA (X9)
Water Temp
too high
J-LX
J-LX
NEAR
WHITE (X10)
J300
J300

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents