Poor Jet Action; Water Is Too Hot; No Heat - Jacuzzi J-375 Owner's Manual

J-300 collection
Table of Contents

Advertisement

15.4

Poor Jet Action

Make sure all jets are in the full open "on" position (page 30).
Press the JETS 1 button to make certain pump #1 is on.
Verify all air controls are in the "on" position by pressing down on
their Jacuzzi Logo (page 31).
Check for dirty filter. Clean, if necessary (Section 12.1, page 39).
15.5

Water is Too Hot

Reduce thermostat setting.
15.6

No Heat

1. Check thermostat setting.
2. Keep the spa cover in place while heating.
3. Check the settings to see if your spa is in economy mode (page 34).
Should checking the above steps fail to correct the problem, please call
your Jacuzzi Hot Tub dealer so that they may arrange service. We build
the best spas in the industry. Nonetheless, we are always striving to
improve the quality and features of our products.
Your input as a Jacuzzi spa owner is a cherished part of this process. If
you have any comments or suggestions, or if you wish to be informed on
any new products for your spa, please write to us.
CONGRATULATIONS on your good taste and welcome to the happiest
and most relaxed family in the world!
J-300
55

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

J-385J-365J-355J-335J-345J-315 ... Show all

Table of Contents