Jets; Selecting Desired Massage Action; Waterfall Feature; Air Controls - Jacuzzi LED Series Troubleshooting Manual

4.5 Jets

The water flow through individual jets in your spa can be adjusted or turned off by rotating
the outside jet ring. Some jets offer an adjustable center nozzle that allows you to change
the water discharge angle. Simply tilt the center nozzle in these jets to the desired angle to
customize your personal massage. Other jets offer a spiral action that produces a surging
stream of air and water that provides a vigorous massage.
Note: Always keep at least 6 adjustable jets open at all times to ensure proper filtration
characteristics within the spa.

4.6 Selecting Desired Massage Action

All models incorporate a massage selector valve that allows you to customize the
massage and performance by diverting water between various jet systems within the spa.
Simply turn valve to positions A, B or C to divert water pressure to various jet groups.
Note: The valve is intended to operate in positions A (Combo), B, or C for optimum
performance. It is considered normal for sound levels within the valve to increase between these
positions due to the large amounts of water flowing through it. For optimum filtration benefits, always
leave this valve in position A when the spa is covered and select positions B or C for maximum jet
performance during spa use.

4.7 Waterfall Feature

The waterfall feature allows you to independently control it for a customized soothing effect. The
waterfall is on when the circulation pump is on. The JETS 1 or CLEARRAY buttons will also activate
the waterfall feature. Waterfall Operation Details:
A. Push thumb wheel on top of waterfall to the left (while in spa) to start or increase
flow.
B. Push thumb wheel on top of waterfall to the right (while in spa) to slow or turn flow
off.
Note: When the waterfall is in the OFF position, some water could still flow through.

4.8 Air Controls

Certain jet systems have their own "toggle" on/off air control. Each control introduces air
into the water lines that supply specific jet groups. Simply press any air control button
Jacuzzi logo side down to open or press the opposite side of button to close.
Note: To minimize heat loss, close all air controls (Jacuzzi logo up) when spa is not in use.
6
B C
A