Installing The Avaya Ethernet Routing Switch 4500 Series On A Table Or Shelf - Avaya 4500 Series Installation Manual

3. Rubber footpads
4. AC power cord
5. Standard 1.5 foot (45 cm) stacking cable
6. Documentation
Note:
Cable trays can be provided as an option.
Installing the Avaya Ethernet Routing Switch 4500 Series on
a table or shelf
You can install a single 4500 Series Avaya Ethernet Routing Switch on any flat surface. The
surface must support the combined weight of the switch and attached cables (from 15 and 20
pounds [7 to 9 kilograms]).
To install a 4500 Series switch on a table or shelf, perform this procedure.
Caution:
Do not place an Avaya Ethernet Power Supply Unit or Avaya Ethernet Redundant Power
Supply on top of an Avaya Ethernet Routing Switch 4500 Series. The switch housing of a
4500 Series Avaya Ethernet Routing Switch cannot support the weight of these units. For a
translation of this statement, see
1. Attach the included rubber footpads on the bottom of the switch at the locations.
Installation

Installing the Avaya Ethernet Routing Switch 4500 Series on a table or shelf

• Screws to attach brackets to the switch
• Screws to attach the switch to the equipment rack
Translations of safety messages on page 63.
November 2010 21