Chapter 4: Installing the Avaya Ethernet
This section provides the information and procedures to install the Avaya Ethernet Routing Switch 4500
Series. Unless otherwise noted, tasks in this section apply to all switches in this series.
Navigation:
•
Electrostatic discharge
•
Environmental requirements
•
Package contents
•
Installing the Avaya Ethernet Routing Switch 4500 Series on a table or shelf
•
Installing the Avaya Ethernet Routing Switch 4500 Series in an equipment rack
•
Cable requirements for the Avaya Ethernet Routing Switch 4500 Series
•
Installation and removal of Small Form-factor Pluggable (SFP) transceivers
•
RJ-45 connector pin assignments
•
Console port pin assignments
•
Universal Serial Bus (USB) ports
•
Power specifications for the Avaya Ethernet Routing Switch 4500 Series
•
Connect AC power
•
Check Light Emitting Diode (LED) on the Avaya Ethernet Routing Switch 4500 Series
37
•
Set IP parameters for the Avaya Ethernet Routing Switch 4500 Series
•
Avaya Ethernet Routing Switch 4500 series stacking
•
Stack configurations
Electrostatic discharge
This section provides information and procedures to prevent electrostatic discharge during
installation.
Preventing electrostatic discharge damage
Electrostatic discharge (ESD) is a discharge of stored static electricity that can damage
equipment and impair electrical circuitry. Electrostatic voltages can result from friction
Installation
Routing Switch
on page 17
on page 19
on page 20
on page 27
on page 31
on page 31
on page 35
on page 59
on page 24
on page 32
on page 45
on page 53
on page 21
on page 22
on page 25
on page
November 2010
17