Rj-45 Connector Pin Assignments - Avaya 4500 Series Installation Manual

4. If the transceiver does not slide easily from the module slot, use a gentle side-to-
5. Attach a dust cover over the fiber-optic bores and store the transceiver in a safe

RJ-45 connector pin assignments

The following section describes the connector pin assignments for the RJ-45 connectors in the
Avaya Ethernet Routing Switch 4500 Series switches.
Navigation:
• Table 4: 4524GT, 4526GTX and 4548GT RJ-45 connector pin assignments
27
• Table 5: 4524GT-PWR, 4526GTX-PWR and 4548GT-PWR RJ-45 connector pin
assignments
• Table 6: 4526T and 4550T RJ-45 connector pin assignments
• Table 7: 4526T-PWR and 4550T-PWR RJ-45 connector pin assignments
• Table 8: 4526GTX-PWR, 4524GT-PWR, 4550T-PWR and 4526T-PWR PoE RJ-45
connector pin assignments
• Table 9: 4548GT-PWR PoE RJ-45 connector pin assignments
Avaya Ethernet Routing Switches 4524GT, 4526GTX and 4548GT
The following table describes the RJ-45 connector pin assignments in the Avaya Ethernet
Routing Switches 4524GT, 4526GTX and 4548GT.
Table 4: 4524GT, 4526GTX and 4548GT RJ-45 connector pin assignments
Connector
Installation
side rocking motion while firmly pulling the transceiver from the slot.
place until you need it.
Important:
Discard transceivers in accordance with the proper laws and regulations.
on page 28
Pin Number
1 Output transmit data +
(TX–)
2 Output transmit data - (TX–) Input receive data - (RX–)
3 Input receive data + (RX+)
on page 30
Signal for 10/100Base T
MDI configuration
RJ-45 connector pin assignments
on page 28
on page 29
on page 30
Signal for 10/100BaseT
MDI-X configuration
Input receive data + (RX–)
Output transmit data + (TX
+)
November 2010
on page
27