Avaya 4500 Series Installation Manual page 36

Installing the Avaya Ethernet Routing Switch
Danger:
Using power cords with a proper grounding path
Use only power cords that have a grounding path. Without a proper ground, a person who
touches the switch is in danger of receiving an electrical shock. Lack of a grounding path to
the switch can result in excessive emissions. For a translation of this statement, see
Translations of safety messages
Connect power to the back panel
Connect the AC power cord to the back of the switch, and then connect the cord to an AC
power outlet. The following figure shows how to connect the AC power cord to the switch back
panel.
Important:
The Avaya Ethernet Routing Switch 4500 Series has no AC power switch. When you
connect the power cord to a suitable, energized AC power outlet, the switch powers up
immediately.
Figure 3: Connecting AC power to the back panel
Warning:
Disconnecting the AC power cord is the only way to turn off AC power to the Avaya Ethernet
Routing Switch 4500 Series. Always connect the AC power cord in a quickly and safely
accessible location in case of an emergency. For a translation of this statement, see
Translations of safety messages
36 Installation
on page 63.
on page 63.
November 2010