Service; Data - Pentair AK110 Installation And User Manual

To manually reset the Overfeed Timer be sure that the cursor is
beside the TD Reading and press the ENTER button.
All Off 10 min (NO) Press the Enter button to turn all three relays off for 10 minutes . This feature is useful when calibrat-
ing . After selecting the display will change to (YES) selecting the line again will remove the "All OFF" condition .
• Clear Calibrations: Clears all previously entered calibrations
• Clear Data: Erases all of the existing data.
• Clear Relay Timers: Resets all timers to zero for all relays.
Sensor readings are recorded every 2 hours into the data log . Up to 12 lines of data can be recorded a day . The
Controller will save up to 441 lines of data in its data log . When the data log is full the oldest records will be over
written .
The default data log includes the day of operation, the hour sequence, and the sensor readings . When used in
conjuction with a real time clock, data includes date and hour and sensor readings. Pressing the down arrow key to
view subsequence data .
When downloading the data with a PC the following information will also be displayed:
Title = MPBPF123: Modem, PC RS232, Front Button pressed, Password entered, Flow S1 on, and relays 1-3 status .
Programming
This will reset the timer to zero.

Service

Data

ACU-TROL ® AK110 Chemical Controller Installation and User's Guide
35