The Name Setup submenu allows the system controlled by the Controller to be specifically identified on the Controller
and in its communication with other devices . The name of the Controller is particularly useful when using remote
communication devices such as the standard and wireless modem . Naming each aquatic system, pool, or spa will make
it easier to identify each Controller and verify its location before making modifications to the system .
The alphanumeric characters that make up the system name are entered using the touch-pad . You have a full range of
letters, numbers and symbols available to aid you in uniquely identifying each system under your control .
Opens a menu where time, date and day can be changed .
•
Time: Time of day; place cursor next to TIME select ENTER to set time in hours, minutes, seconds .
•
Date: Optional with Real Time Clock Module. (Part# 724000280)
Date must be set when Real Time Clock is installed . If not installed date with default to 00:00:00 .
•
Day: Optional with Real Time Clock Module. Day must be set when Real Time Clock is installed.
If not installed day with default to 00:00:00 .
•
Units: Select to toggle between Metric and English units. When metric is selected the date is dd/mm/yy,
when English is selected the date format is mm/dd/yy .
•
Sanitizer: Select between "Cl" (chlorine) and "Br" (bromine).
•
On Delay: Pressing Enter on this line increments (by 15) the number of seconds the relays will be off on
power up .
•
Backlight Time: Select the amount of time the Controller screen backlight will be on each time the control
panel is activated .
•
Temp Display: Displays water temperature in farnihiet degrees. To turn temperature sensor off, toggle on/off
and select enter .
•
Reset to Default: Returns Controller to original factory default settings.
32
ACU-TROL
AK110 Chemical Controller Installation and User's Guide
®
Name
System