Selecting Items In The Windows; Making Changes - Pentair AK110 Installation And User Manual

The 16-button touch pad is used to access and modify the different Controller functions:
• Pressing the BACK button on the touch pad will move back one window.
• Pressing the BACK button will toggle between DISPLAY SCREEN and MENU LIST. If the "RED security light" is
on a password must be entered to access MENU LIST .
• Pressing the arrow buttons will reposition the cursor on the screen. The UP or DOWN arrow buttons will scroll
up or down the screens and the RIGHT and LEFT will move arrows to the RIGHT and LEFT on the screen
See page 48 for more detailed navigation instructions .
Press 16 Button touch pad with finger pads only. A sharp object such as a
To change a parameter move the cursor to the parameter and press the ENTER key . The Controller will then open the
value entry screen for that parameter . The Controller navigation system uses the following considerations:
1 . Use the right and left arrows to change to a different digit to enter .
2 . Press a number on the keypad to change a digit .
3 . Press the left button to add a digit and make the number bigger .
4 . Press the ENTER button to save the chang
Changes must be saved by pressing the final ENTER.
If ENTER is not pressed as the last step the changes with not be saved.

Selecting Items in the Windows

! WARNING
pen or tool will damage button pads.

MAKING CHANGES

e .
NOTE
ACU-TROL ® AK110 Chemical Controller Installation and User's Guide
25