Remove flow cell from shipping carton and make sure all parts are included with AK1200 flow cell .
• 1 – AK1200 Lid
• 1 – Flow switch magnet
• 1 - Sample barb fitting
• 1 - Filter assembly with O-Ring
• 1 - Flow switch with O-Ring, 2'
and 10' wire lengths available.
• 2 - Mounting screws
Note that ½" flexible tubing is not included and is supplied by the installer or may be ordered from Acu-Trol.
18
ACU-TROL
AK110 Chemical Controller Installation and User's Guide
®
SECTION 4
AK1200 FLOW CELL
AK1200 Flow Cell
• 1 – AK1200 Jar with O-Ring
• 3 - ¼" Valves.
• 4 - ¼" NPT by ½" flex fittings.
• 2 - ¼" plugs.
• 1 - ¼" Close Nipple
• 1 - Threaded Seal Tape