Table of Contents
Advertisement
Service and Maintenance
WaterSwitch is a warm, dry environment for hibernating insects. These
can cause electrical malfunction. Ensure that your property is vermin free.
WaterSwitch is electrically connected. Ensure that it is isolated from
electrical supply during installation and any subsequent service work.
WaterSwitch should only be serviced by a Pentair Water service agent.
WaterSwitch Service
Before removing WaterSwitch for service:
1. Switch off power to WaterSwitch before proceeding.
2. Close shut off valves at inlet, outlet and water tank gate valve.
3. Carefully release all pressure from the pump and piping system.
4. Never tighten or loosen fittings while the pump is operating.
To reset from 'loss of prime' mode
A) Turn off power for 10 seconds.
B) Turn power supply back on.
C) Reprime the pump. Check for blockages in the suction line.
WaterSwitch should resume normal operation
15
Hide quick links:
Advertisement
Table of Contents
