HP 1650B Programming Reference Manual page 290

WIDTh
WIDTh
Note !!!!
Command Syntax:
where:
<width-value >
Example:
20-8
The WIDTh command specifies the width (number of characters) in
names
which the symbol
The WIDTh command does not affect the displayed length of the symbol
offset value.
:MACHine(l j2):SYMBol:WiDTh c label-name > , c width-value >
:: = string of up to 6 alphanumeric characters
:: = integer from 1 to 16
OUTPUT XXX;":MACHINEl:SYMBOL:WIDTH
will be displayed when symbols are used.
Programming Reference
command
HP 1850B/HP 16518