HP 1650B Programming Reference Manual page 250

The GLITch command allows you to specify the glitch recognizer term for
the timing analyzer trigger on a per label basis. Each command deals with
only one label in a given glitch specification, and, therefore a complete
specification could require several commands. The glitch specification
uses the characters '*' and "." as follows:.
The position of these characters in the string corresponds with the
position of the channels within the label. All channels with the "*" are
The GLITch query returns the glitch specification for the specified label.
Command Syntax: : M A C H i n e { l I2):TTFlace:GLITch
where:
< l a b e l - n a m e > :: = string of up to 6 alphanumeric characters
:: = string of characters "{*I.)..."
Example:
OUTPUT XXX;
Query Syntax:
: M A C H i n e l :lTRace:GLITch?
Returned Format:
Example:
20 OUTPUT XXX; ":MACHINEl:TTRACE:GLITCH?
30 ENTER XXX;G$
40 PRINT G$
50 END
D I M G$[lOO]
command/query
HP 1650B/HP 16518
Programming Reference