HP 1650B Programming Reference Manual page 192

MMODe
MMODe
Command Syntax:
where:
Example:
Query Syntax:
Returned Format:
Example:
13-10
The MMODe command (Marker Mode) selects the mode controlling the
marker movement and the display of marker readouts. When PATTern is
selected, the markers will be placed on patterns. When STATe is selected
and state tagging is on, the markers move on qualified states counted
between normally stored states. When TIME is selected and time tagging
is enabled, the markers move on time between stored states. When
patterns, but the readouts will be time statistics.
The MMODe query returns the current marker mode selected.
1 12):SLISt:MMODe
: : = {OFF~PAllern~STATe~TIME~MSTats}
OUTPUT XXX;":MACHINEl:SLIST:MMODE
1 I2):SLISt:MMODel -Z m a r k e r - m o d e > < NL>
1 0 D I M Mn$[lOO]
2 0 O U T P U T XXX;":MACHINEl:SLIST:MMODE?"
3 0 E N T E R XXX;Mn$
40 PRINT Mn$
50 END
command/query
TIME"
HP 1650B/HP 1651B
Programming Reference