HP 1650B Programming Reference Manual page 242

Note ti * d
Command Syntax:
where:
TTL
E C L
Example:
Query Syntax:
Returned Format:
Example:
17-6
The THReshold command allows you to set the voltage threshold for a
given pod to ECL, TTL or a specific voltage from -9.9V to + 9.9V in 0.1
volt increments.
m ependently. The pod thresholds of pods 4 and 5 are slaved together;
therefore, when you set the threshold on pod 4 or 5, both thresholds will
be changed to the specified value. On the HP 1651B, both pods 1 and 2
can be set independently.
The THReshold query returns the current threshold for a given pod.
::= pod number (112131415)
:: = voltage (real number) -9.9 to +9.9
:: = default value of + 1.6V
:: = default value of -1.3V
OUTPUT XXX;":MACHlNEl:TFORMAT:THRESHOLD14.o"
20 OUTPUT XXX;":MACHINEl:TFORMAT:THRESHOLDE?"
30 ENTER XXX;Value$
40 PRINT Value$
50 END
command/query
< v a l u e > <NLs
HP 1650B/HP 16518
Programming Reference