Mese - HP 1650B Programming Reference Manual

MESE

Command Syntax:
where:
Example:
HP 1650B/HP 16518
Programming Reference
The MESE command sets the Module Event Status Enable Register bits.
The MESE register contains a mask value for the bits enabled in the
MESR register. A one in the MESE will enable the corresponding bit in
the MESR, a zero will disable the bit.
The MESE query returns the current setting.
Refer to table 6-2 for information about the Module Event Status Enable
register bits, bit weights, and what each bit masks for the logic analyzer.
:: = integer from 0 to 255
O U T P U T XXX;":SYSTEM:MESE 1"
MESE
command/query
System Commands
6-27