HP 1650B Programming Reference Manual page 195

OSEarch
Command Syntax:
where:
Example:
Query Syntax:
Returned Format:
Example:
HP 1650B/HP 16518
Programming Reference
The OSEarch command defines the search criteria for the 0 marker,
which is then used with associated OPATtern recognizer
specification when moving the markers on patterns. The origin parameter
tells the marker to begin a search with the trigger, the start of data, or with
the X marker. The actual occurrence the marker searches for is
determined by the occurrence parameter of the OPATtem
recognizer specification, relative to the origin. An occurrence of 0 places
the marker on the selected origin. With a negative occurrence, the
marker searches before the origin. With a positive occurrence, the
marker searches after the origin.
The OSEarch query returns the search criteria for the 0 marker.
1 I2):SLISt:OSEarch
:: = integer from -1023 to + 1023
:: = {TRIGger
OUTPUT XXX;":MACHINEl:SLIST:OSEARCH
: M A C H i n e { l [2}:SLISt:OSEarch?
10 DIM Os$[lOO]
20 OUTPUT
3 0 E N T E R XXX;Os$
4 0 P R I N T Os$
50 END
command/query
<occurrence >, c origin >
< o c c u r r e n c e > , <origin
OSEarch
13-13