HP 1650B Programming Reference Manual page 193

OPATtern
Command Syntax:
where:
c label-pattern >
Examples:
HP 1650B/HP 16518
Programming Reference
The OPATtern command allows you to construct a pattern recognizer
term for the 0 Marker which is then used with the OSEarch criteria when
moving the marker on patterns. Since this command deals with only one
label at a time, a complete specification could require several invocations.
When the value of a pattern is expressed in binary, it represents the bit
values for the label inside the pattern recop term. In whatever base
is used, the value must be between 0 and 2
more than 32 bits. Because the c labelqattem > parameter may contain
don't cares, it is handled as a string of characters rather than a number.
The OPATtern query returns the pattern specification for a given label
name.
1 I2):SLISt:OPATtern
:: = string of up to 6 alphanumeric characters
: : = "{#B{Oll IX}. . . 1
O U T P U T XXX;":MACHINEl:SLIST:OPATTERN
O U T P U T XXX;":MACHINEl:SLIST:OPATTERN
command/query
< l a b e l - n a m e >, -z labelgattern
. . 1
OPATtern
13-11