HP 1650B Programming Reference Manual page 280

XSEarch
XSEarch
Command Syntax:
where:
c origin >
Example:
Query Syntax:
Returned Format:
Example:
19-28
The XSEarch command defines the search criteria for the X marker
which is then used with the associated XPATtern recognizer specihcation
and the XCONdition when moving markers on patterns. The origin
parameter tells the marker to begin a search with the trigger. The
occurrence parameter determines which occurrence of the XF'ATtern
recognizer specification, relative to the origin, the marker actually
searches for. An occurrence of 0 (zero) places a marker on the origin.
The XSEarch query returns the search criteria for the X marker.
:: = TRlGger
:: = integer from -9999 to +9999
OUTPUT XXX; ":MACHINEl:TWAVEFORM:XSEARCH,+lO,TRIGGER"
1 [2):TWAVeform:XSEarch?
10 DIM xss [loo]
2 0 O U T P U T XXX;":MACHINEl:TWAVEFORM:XSEARCH?"
30 ENTER XXX; Xs$
4 0 P R I N T Xs$
50 END
command/query
<occurrence z-, <origin
<occurrence >, <origin
HP 1850B/HP 18518
Programming Reference