Lan - Planet VDR-301n User Manual

5.3.5 LAN

Choose Setup > LAN. The LAN page that is displayed contains LAN, DHCP, DHCP Static and LAN IPv6.
5.3.2.1 LAN
Click LAN in the left pane and the page shown in the following figure appears. On this page, you can change IP
address of the router. The default IP address is 192.168.1.1, which is the private IP address of the router.
The following table describes the parameters:
Field
IP Address
Subnet Mask
Secondary IP
IGMP Snooping
MAC Address Control
New MAC Address
Figure 5-25 LAN
Description
The IP address of your LAN hosts is used to identify the device's LAN port.
Enter the subnet mask of LAN interface.
Select it to enable/disable a secondary LAN IP address. The two LAN IP
addresses must be in the different network.
Enable or Disable the IGMP snooping function for the multiple bridged LAN
ports.
It is the access control based on MAC address. Select LAN1, LAN2, LAN3,
LAN4, WLAN and the host whose MAC address listed in the Currently
Allowed MAC Address Table can access the device. Then click "Apply
Changes" to save the new settings.
Enter MAC address and then click Add to add a new MAC address.
47
User Manual of VDR-301N