Auto Pvc - Planet VDR-301n User Manual

5.3.2 Auto PVC

Choose Setup > Auto PVC and the page is displayed below. On this page, you can get a PVC automatically
by detecting function. Add or delete the PVC that you do not need.
The following table describes the parameters:
Field
Probe WAN PVC
VPI
VCI
Figure 5-22 Auto PVC
Description
Click Probe to display WAN Permanent virtual circuit.
Virtual Path Identifier. This is read-only field and is selected on the
Select column of the Current ATM VC Table.
Virtual Channel Identifier. This is read-only field and is selected on the
Select column in the Current ATM VC Table. The VCI, together with
VPI, is used to identify the next destination of a cell as it passes through
the ATM switch.
43
User Manual of VDR-301N