5.7.6.3 Traceroute
Choose Diagnostic >Traceroute and the following page appears. By Traceroute Diagnostic, you can track
the route path through the information which is from your computer to the other side host on the Internet.
The following table describes the parameters:
Field
Host
NumberOfTries
Timeout
Datasize
DSCP
MaxHopCount
Interface
Figure 5-87 Traceroute
Description
Enter the destination host address for diagnosis.
Number of repetitions.
Put in the timeout value.
Packet size.
Differentiated Services Code Point, You should set a value between
0-63.
Maximum number of routes.
Select the interface.
105
User Manual of VDR-301N