Channel Width
Control Sideband
Channel Number
WLAN Domain
Radio Power (Percent)
Associated Clients
Click Show Active Client and the page shown in the following figure appears. You can view the information of the
clients connected to the VDSL2 Router.
Select channel width to 20MHz, 40MHz or 20/40MHz.
Select Upper or Lower sideband.
Select the appropriate channel from the list provided to correspond with your
network settings. You will assign a different channel for each AP to avoid
signal interference.
Select FCC 1~11 or ETSI 1~13.
100%, 80%, 50%, 25%, 10%.
Click it to see the clients currently associated with VDR-301N.
Figure 5-34 Active Wireless Client Table
56
User Manual of VDR-301N